Presence detector 360°, with two channels, to switch lights and ventilation on and off for flush-mounting in ceilings, white

This 2-channel presence detector is suitable for ceiling mounting and is used to switch indoor lighting and ventilation. This presence detector has a circular detection range with a diameter of up to 20 m that can be adjusted with the help of the cover mask. The device has a built-in light sensor and switches the lighting and the ventilation on or off automatically or manually with an N.O. push button (to be ordered separately). After the pre-set switch off period, the light and the ventilation are switched off automatically. The device has an IP20 protection degree and conforms to the European directive, EN 60669-2-1, for EMC and safety.

Finishing colour: white

Presence detector 360°, with two channels, to switch lights and ventilation on and off for flush-mounting in ceilings, white.

• Detector technology: PIR
• Input voltage: 230 Vac ± 10 %, 50 Hz
• Detector output: 230 V (ON/OFF)
• Number of channels: 2 channels
• Light intensity range: 10 lux – 1000 lux
• Switch-off delay: 1 min – 30 min
• Detection angle: 360°
• Detection range (PIR): ø 20 m from a height of 3 m
• Ambient temperature: -5 – +50 °C
• Mounting method: surface mounting
• Mounting height: 2.5 – 3 m
• Usage: for indoor use only
• Relay contact: N.O. (max. 10 A)
• Relay contact 2: N.O. (max. 10 A)
• Maximum load incandescent and halogen lamps (cosφ = 1): 2300 W
• Maximum load low voltage halogen lamps: 500 W
• Maximum load economy lamps (CFLi): 1200 W
• Maximum load ventilation motor: 680 VA
• Maximum capacitive load: 140 µF
• Maximum switching current: 80 A/20 ms
• Protection degree: IP20
• Protection class: Class II device
• Marking: CE