RGB(W) controller RF

The RGB(W) controller RF is designed to control 12 to 36 Vdc LED strips (common anode). Depending on the voltage of the LED strip, the controller has a maximum capacity of 50 to 150 W per channel. For 12 Vdc LED strips, the capacity is 50 W per channel, for 24 Vdc LED strips it is 100 W and for 36 Vdc LED strips it is 150 W.

The controller automatically recognises which LED strips – RGB, RGBW or tunable white – you have connected. For automatic detection, the LED strip must be a minimum of 30 cm long.

An RGB(W) controller RF can be operated by a maximum of ten wireless RGB(W) wall controls (1XX-90001). If you add more than ten RGB(W) wall controls to the installation, the first wall control (in the sequence in which you programmed them) will be erased from the controller.

Each RGB(W) wall control can operate a maximum of ten RGB(W) controllers RF simultaneously. In this case, you must set the controllers in a master-secondary configuration so that all lighting reacts completely synchronously. You connect a maximum of one master and four secondary controllers to one wall control.

• frequenty band: 868,0 – 868,6MHz
• maximum power output: -7,45 dBm

RGB(W) controller RF

Technical data

• Marking: CE