! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

This article is (or will soon be) unavailable. It has been replaced by the following article(s):

EREATRONIC 105i

Compact electronic 105W transformer with wire connections at primary and secondary side

Reference code
320-00130

No longer available since January 2022

Technical datasheets
Inspection certificates
Certificaten CE-Marking

Description

This cast resin, electronic transformer has a capacity of 105W and is universally dimmable. It is suitable for the connection of low-voltage loads (12 V). For a quick and correct connection, you connect the cable on the primary side to a Niko mini-connection box . The silicon wire on the secondary side can be directly connected to a spotlight. The cables are fixed with resin. The transformer is extremely compact and is therefore very well-suited for installation in small spaces. This transformer is also suitable for flush mounting in furniture. It is equipped with an integrated thermal protection and an integrated protection against short-circuit, overload and overheating.

Specification description

Compact electronic 105W transformer with wire connections at primary and secondary side

  • Function: electronic transformer
  • Input voltage: 230 Vac ± 10 %, 50 Hz
  • Dimensions (HxWxD): 80 x 48.5 x 28.5 mm
  • Primary wire connection: double insulated mains lead with cord end terminals: 2 x 0.75 mm², length 30 cm
  • Secondary wire connection: with silicon-insulated wire (170 °C): 2 x 0.75 mm², length 30 cm
  • Number of exits (pairs): 1
  • Maximum wire length secondary connection: 2 m
  • Output voltage: 11.5 Vac, 35 kHz
  • Minimum load: 35 W
  • Maximum load: 105 W
  • Maximum housing temperature (Tc): 80 °C
  • Application: suitable for flush-mounting in furniture
  • Mounting method: flush-mounting
  • Safety protections: self-resetting, built-in protection against short-circuit, overload and overheating
  • Fire safety
    • The transformer is suitable for normal combustible surfaces
  • Protection degree: IP20
  • Protection class: Class III device: SELV (safety extra low voltage), suitable as a power supply for class III loads
  • Finishing colour: black
  • Material upperframe: plastic
  • Certification marks: ENEC
  • Marking: CE

Select a product below to view related articles, variants or accessories:

Favorites ( 0 )