Electronic 150 W transformer, IP65, incl. rubber insulated wires on the primary side

This electronic transformer has a capacity of 150 W and is universally dimmable. It is suitable for the connection of low-voltage loads (12 V). For a quick and correct connection, you connect the cable on the primary side to a Niko mini-connection box . The silicon wire on the secondary side can be directly connected to a spotlight. This transformer is also suitable for flush mounting in furniture. It is equipped with built-in short-circuit, overload and overheating protection. The transformer has an IP65 protection degree.

Electronic 150 W transformer, IP65, incl. rubber insulated wires on the primary side

• Efficiency in full load: 93 %
• Not intended to operate in no-load mode
• Function: electronic transformer
• Input voltage: 230 Vac ± 10 %, 50 Hz
• Dimensions (HxWxD): 113 x 52 x 32 mm
• Primary wire connection: with rubber insulated cable: 2 x 1 mm², length 50 cm
• Secondary wire connection: with silicon-insulated wire (170 °C): 2 x 0.75 mm², length 30 cm
• Number of exits (pairs): 1
• Maximum wire length secondary connection: 2 m
• Output voltage: 11.5 Vac, 50-60 Hz
• Minimum load: 35 W
• Maximum load: 150 W
• Maximum housing temperature (Tc): 80 °C
• Minimum free space in false ceiling: 100 mm
• Application: suitable for flush-mounting in furniture
• Mounting method: flush-mounting
• Safety protections: self-resetting, built-in protection against short-circuit, overload and overheating
• Fire safety
  • self-extinguishing: complies with a filament test of 850 °C
  • suitable for normal combustible surfaces
• Protection degree: IP65
• Protection class: Class III device: SELV (safety extra low voltage), suitable as a power supply for class III loads
• Finishing colour: white
• Material upperframe: plastic
• Certification marks: ENEC
• Marking: CE
• Weight: 317 g