! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Electronic 105 W transformer, IP65, incl. rubber insulated wires on the primary side

Reference code
320-00107

No longer available since December 2023

Technical datasheets
Technical manuals
Inspection certificates
Certificaten CE-Marking

Description

This electronic transformer has a capacity of 105 W and is universally dimmable. It is suitable for the connection of low-voltage loads (12 V). This transformer has an IP65 protection degree, is dust-free and splashproof. As a result, it is extremely well-suited for installation in a damp room, such as a bathroom or kitchen. For a quick and correct connection, you connect the rubber cable on the primary side to a Niko mini-connection box. The silicon wire on the secondary side can be directly connected to a spotlight. The cables are fixed with resin. The transformer is extremely compact and is therefore very well-suited for installation in small spaces. This transformer is also suitable for flush mounting in furniture. It is equipped with an integrated thermal protection and an integrated protection against short-circuit, overload and overheating.

Specification description

Electronic 105 W transformer, IP65, incl. rubber insulated wires on the primary side

  • Efficiency in full load: 94 %
  • Not intended to operate in no-load mode
  • Function: electronic transformer
  • Input voltage: 230 Vac ± 10 %, 50 Hz
  • Dimensions (HxWxD): 86 x 52 x 32 mm
  • Primary wire connection: with rubber insulated cable: 2 x 1 mm², length 50 cm
  • Secondary wire connection: with silicon-insulated wire (170 °C): 2 x 0.75 mm², length 30 cm
  • Number of exits (pairs): 1
  • Maximum wire length secondary connection: 2 m
  • Output voltage: 11.5 Vac, 50-60 Hz
  • Minimum load: 35 W
  • Maximum load: 105 W
  • Maximum housing temperature (Tc): 85 °C
  • Minimum free space in false ceiling: 100 mm
  • Application: suitable for flush-mounting in furniture
  • Mounting method: flush-mounting
  • Safety protections: self-resetting, built-in protection against short-circuit, overload and overheating
  • Fire safety
    • self-extinguishing: complies with a filament test of 850 °C
    • suitable for normal combustible surfaces
  • Protection degree: IP65
  • Protection class: Class III device: SELV (safety extra low voltage), suitable as a power supply for class III loads
  • Finishing colour: white
  • Material upperframe: plastic
  • Certification marks: ENEC
  • Marking: CE
  • Weight: 217 g

Select a product below to view related articles, variants or accessories:

Favorites ( 0 )