! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

2 RJ45 connections UTP Cat. 6A, PoE++ ready, flat model, incl. base 60 x 71 mm with screw fixing

Reference code
170-66272
Technical datasheets
Technical manuals
Certificaten CE-Marking

Description

This mechanism with 2 RJ45 connection points UTP Cat. 6A, PoE++ ready, flat model, is used to make a network connection with 2 devices for telephone, Ethernet, IP, PoE or internet applications. Each of the connection points on the mechanism is connected in a star configuration to the central connection cabinet using a cable of the same performance type. The base has internal dimensions of 45 x 45 mm and external dimensions of 60 x 71 mm and is equipped with screw fixing. A PoE adapter is required to transport both data and power via the connector. A PoE adapter can be both a PoE injector or a PoE splitter. A finishing set in the colour of your choice must be ordered separately.

This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

Specification description

2 RJ45 connections UTP Cat. 6A, PoE++ ready, flat model, incl. base 60 x 71 mm with screw fixing.

  • Service: 4PPoE
  • PoE standard: IEEE 802.3BT Type 4
  • Maximum power Component (at PD): 72 W
  • Maximum power Source (at PSE): 100 W
  • Voltage range (at PSE): 50.0-57.0 V
  • Voltage range (at PD): 42.5-57 V
  • Maximum current: 860 mA
  • Pairs with current: 4
  • Maximum cable resistance per pair set: 12.5 Ω
  • Power management: Three power class levels negotiated by signature or 0.1 W steps negotiated by LLDP
  • Derating of maximum cable ambient operating temperature: 10 °C (20 °F) with more than half of bundled cables at Imax
  • Supported cabling: Category 5
  • Supported modes: Mode A, Mode B, 4-pair mode
  • Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
  • The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
  • Dimensions (HxWxD): 71 x 73 x 33.2 mm
  • Marking: CE

Universal base for 45 x 45 mm functions.

  • Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
  • Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
  • Flush-mounting frame
    • 1 mm-thick metal
    • galvanized on all sides after cutting, even on the cut edges
    • with 4 grooves with screw hole of 7 mm
    • with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
  • Fixing method
    • with screws for simple fixing in a flush-mounting box with grip surfaces
  • Centre-to-centre distance
    • Simple and quick assembly of one or more mechanisms by the indication (chalk line, laser, etc.) of the centre of the flush-mounting frame
    • vertical coupling centre-to-centre distance 60 mm by sliding several bases into each other, they lock themselves automatically
    • vertical coupling centre-to-centre distance 71 mm using pre-formed lips at the bottom, by folding the lips downwards over a length of 1 mm, the bases support each other and the centre-to-centre distance is guaranteed.
    • horizontal connection of multiple bases is quick and perfect thanks to the folded-up dovetails on the left and right sides
    • extra robustness due to the folded-up edges on the outside of the base and the continuation into the inside of the base
  • End border: The flush-mounting frame is equipped, both on the top and the bottom, with a dark grey, plastic end border. This border is made of PC+ASA and is joined to the flush-mounting frame using a melting process. The corners of the two end borders are equipped with rectangular openings (7.9 x 1.5 mm) each containing a multi-positional snap hook. Thanks to the snap hooks, the 4 rectangular openings ensure that the faceplate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The end borders also have 4 round openings that ensure the correct positioning of the faceplate in relation to the central plate.
  • Ambient temperature: -5 – +40 °C
  • Dimensions (HxWxD): 71 x 73 mm
  • Marking: CE

Adaptor 9.1, single, flat for RJ connectors 650-450xx

  • Dimensions (HxWxD): 20.7 x 44.8 x 20.1 mm
  • Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
  • Marking: CE

Unshielded RJ45 connector UTP Cat. 6A, PoE++ ready, for bandwidths up to 500MHz

  • Service: 4PPoE
  • PoE standard: IEEE 802.3BT Type 4
  • Maximum power Component (at PD): 72 W
  • Maximum power Source (at PSE): 100 W
  • Voltage range (at PSE): 50.0-57.0 V
  • Voltage range (at PD): 42.5-57 V
  • Maximum current: 860 mA
  • Pairs with current: 4
  • Maximum cable resistance per pair set: 12.5 Ω
  • Power management: Three power class levels negotiated by signature or 0.1 W steps negotiated by LLDP
  • Derating of maximum cable ambient operating temperature: 10 °C (20 °F) with more than half of bundled cables at Imax
  • Supported cabling: Category 5
  • Supported modes: Mode A, Mode B, 4-pair mode
  • Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
  • Marking: CE

Select a product below to view related articles, variants or accessories:

This article is an alternative for the following articles that are (or will soon be) unavailable:

Favorites ( 0 )