! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Lighting unit with wires, 230V, with white LED for switches and push buttons for use in trunking systems

Reference code
170-37923
Technical datasheets
Certificaten CE-Marking

Description

This lighting unit is equipped with a wire connection, 230V, and a white LED and is used for illuminating switches and push buttons. This lighting unit can also be used in trunking systems.

Specification description

Lighting unit with wires, 230V, with white LED for switches and push buttons for use in trunking systems

The LED lighting unit is clicked into the lower-back of the base. Depending on the choice of switch, one lighting unit must be clicked into the left recess or two lighting units must be provided in the left and right recesses. The connection wires are PVC insulated. The white light is produced by an LED with very limited power consumption (0.1 W). It is shockproof and does not radiate any heat. The LED has a life span of min. 50,000 burning hours. Wire diameter of the connection wires: 0.5 mm². The connection wires are equipped with two cable sockets for the connection of the lighting unit. CE marking.

  • Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
  • Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
  • Marking: CE

Select a product below to view related articles, variants or accessories:

Favorites ( 0 )