! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Finishing set with 2 cinch audio connections, also for flush mounting in cable trunking systems

Reference code
122-69716
Technical datasheets

Description

Finishing set for audio with two cinch connections. anthracite

Specification description

Finishing set with 2 cinch audio connections, also for flush mounting in cable trunking systems.

  • Function: The central plate is clicked into a 45 x 45 mm flush-mounting frame and must always be mounted with the 'TOP arrow' (indelibly imprinted on the rear of the central plate) pointing upwards. "The central plate is equipped with a white and a red cinch connector which are connected along the rear with two connector blocks.
  • Material central plate: The central plate is enamelled and made of rigid PC and ASA.
  • Colour: enamelled anthracite
  • Fire safety
    • The plastic parts of the central plate are self-extinguishing (comply with a filament test of 650°C)
    • The plastic parts of the central plate are halogen-free.
  • Wire connection
    • each connector block is equipped with cage clamps with permanent screws with a slotted screwhead (slot 0.6 x 3.5 mm)
    • every screw is provided with a screwdriver slot that prevents the screwdriver from sliding off the screwhead.
  • Dismantling: To dismount simply pull the central plate off the base.
  • Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
  • Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
  • Marking: CE

Select a product below to view related articles, variants or accessories:

Favorites ( 0 )