Finishing set for wall motion detector 180°, 9 m, Niko Home Control

Finishing set for wall motion detector for Niko Home Control (550-2021X). You can switch the light on and off using the button. The LED lights up when you activate the motion detector manually.

Finishing set for wall motion detector 180°, 9 m, Niko Home Control.

The indoor motion detector detects moving heat sources and activates or deactivates Niko Home Control functions.

The indoor motion detector detects moving heat sources by using Passive Infrared Technology (PIR). When motion is detected, the motion detector activates or deactivates certain Niko Home Control functions. These functions are assigned while programming the installation by linking functions to the unique address of each indoor motion detector. When a person enters the detection area, the motion detector initiates the starting behaviour. When the person has left the detection area or remains motionless within the area (up to 10 s after last detection) the stopping behaviour will be initiated. The indoor motion detector includes a manual mode option. In manual mode, the indoor motion detector will behave as if there were permanent motion. Press the manual mode button to activate or deactivate this mode. If manual mode is not deactivated, the function linked to that motion detector will remain active for 4 hours.

The indoor motion detector consists of two parts: the sensor (103-55511) and the base (550-2021X). Both elements are mounted onto a standard flush-mounting box using screws.

The maximum detection range is 8 m.

The potentiometer underneath the cover of the sensor can be used for changing the light sensitivity setting to any value between 5 and 1200 lux.

Technical data:

• resting potential: 26 Vdc (SELV, safety extra-low voltage)
• CE marking
• detection angle: 180° horizontal, 60° vertical
• detection range: 8 m (horizontal)
• light sensitivity: 5 - 1200 lux
• manual mode option
• ambient temperature: -5 - 45°C
• colour of the finishing set: silver grey
• Marking: CE
• Input voltage: 26 Vdc (SELV, safety extra-low voltage)
• Dismantling: To dismount simply pull the central plate off the base.
• Impact resistance: After mounting, an impact-resistance of IK06 is guaranteed.
• Marking: CE