Modular, 2-channel RF receiver

This 2-channel receiver for DIN-rail mounting is controlled wirelessly via radio frequency. It has two, 10A / 230V potential-free changeover contacts and a connection for an external antenna (05-309). You can choose from 5 modes for the on/off functions. Depending on the mode chosen, the control occurs via 1, 2 or 4 buttons. You set the operating time to between 0 and 3 seconds and the switch-off time between 0 and 120 minutes. Will you use the 2-channel receiver for the control of roller shutters or a ventilator? Then, you have the following function settings:

• opening, closing or stopping the roller shutters;
• setting the speed of the ventilator.

You can only connect the device to 1 phase. The contact may not be used for circuits with safety extra-low voltage (SELV). The modular dimmers 05-703, 05-704, 05-707 and 05-728 can be used in combination with this receiver. All dimmers must receive their power from the same phase.

Technical characteristics:

• dimensions: 4U.

Modular, 2-channel RF receiver

• Communication protocol: Easywave
• Marking: CE