! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Step 1

Important beforehand

What you need to know in order to install Niko Home Control?

  • You understand the operation and opportunities of the Niko Home Control installation for traditional wiring (the eco system) and know the opportunities of each connected product.

  • You understand that the products for Niko Home Control for traditional wiring must be installed in accordance with the relevant national legislation.

  • You have technical knowledge of electrical installations. For example, you understand the RGIE/AREI (regulation), you know how an intermediate switching works, you can read simple electrical charts and you can use a multimeter.

What do you need when installing Niko Home Control?

  • You need a modern electrical installation with three or five wires (phase, neutral conductor, earthing and possibly switching wires) with a cross-section of 1.5 or 2.5 mm2. This is usually the case in houses built as from 1985. To install a connected switch there needs to be a neutral conductor in the flush-mounting box. This is not necessary for a connected dimmer.

  • You have an internet network in your home. You can modify your switching without internet, however, you cannot register the wireless smart hub and you cannot program the switch(es) in the Niko Home app.

  • You have extra wiring (three or more colours), connection terminals, a wire stripper and a screwdriver at the ready.

  • You have the Niko Home Control products for traditional wiring at the ready. You need the following products for the basic installation: a wireless smart hub, a connected single switch, a central plate and a finishing set (bought separately).

Start installation

 

Back to menu product