Step 2
Adapt two-way switching
Identify the present connection diagram and mark the following wires with labels:
- Phase conductor supplying 230V
- Wires that lead to the lamp
Warning: In reality, the switching can look different to what you see on the drawing. The wires leading to the lamp do not always go upwards. Also, the phase conductor and neutral conductor may be in a different colour. Therefore, use a multimeter to correctly identify the connection diagram.
Current connection diagram
Warning: Your connection may look different, this example is only one of the options.
Niko Home Control connection diagram
Connect the connected double switch.
Warning: Always connect the connected switch directly to the lamp.
You need an extra wire❶ and a larger connection terminal❷, since you must connect the neutral conductor to the connected switch (you can also establish a connection via the N terminal). When connecting with the push button one of the switching wires will no longer be used ❸. On the extension exit of the connected switch you connect a traditional push button❹. You therefore replace both switches
