! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Effektbelysning

LED-lamper bruger næsten ingen energi. De giver meget lys og holder i mange år. Med LED-belysning kan du også skabe den stemning, du ønsker i dit hjem. Du kan belyse køkkenbordet, din bogreol eller et badeværelsesskab. Eller fremhæve et billede på væggen, natbordet eller en figur.

Vores LED-strips kan skjules ved hjælp af en profil, der passer til dit interiør. Med matte og gennemsigtige afdækninger fås netop det udseende, du ønsker. De betjenes med almindelige eller trådløse tryk eller med smartphone.

Da LED-belysning ikke bliver varm, kan den være tændt hele natten. Ideel som orienteringsbelysning i børnenes værelser, i gangen eller på trappen.

Wireless 4-channel constant voltage controller

The 4-channel controller is suitable for controlling LED strips (constant voltage, common anode) from 12 to 24 Vdc. The controller has a maximum power of 50W per channel for 12Vdc LED strips and of 100W per channel for 24Vdc LED strips. The controller can control the following types of LED strips: RGB, RGBW, tunable white and monochrome. We recommend using the specifically designed RGB(W) wall controller in 4-button mode (article numbers 410-00002 + xxx-90002) for controlling the colour LED strips. Replaces 340-00120 & 340-00121

DIN rail power supply for LED strips, 24 Vdc - 100 W

The power supply is suitable for powering LEDs and is designed for DIN rail mounting. The power supply is equipped with a primary input and four secondary terminals to connect two loads. Usage of screw terminals, both at primary and at secondary side. The output power range is adjustable. In compliance with the European directives for EMC and safety

DIN rail power supply for LED strips, 24 Vdc - 60 W

The 60W power supply is suitable for powering LEDs and is designed for DIN rail mounting. The power supply is equipped with a primary input and four secondary terminals to connect two loads. Usage of screw terminals, both at primary and at secondary side. The output power range is adjustable. In compliance with the European directives for EMC and safety.