! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Products on bus wiring

Are you building a new house or extensively renovating your current home, and replacing the electrical wiring? Then let Niko Home Control install bus wiring. Bus wiring is not just simple wiring but also facilitates complete home automation, with endless possibilities and the flexibility to expand the system, if your family circumstances change for example.

During the electrical works, your installer can ensure you have all the wiring you need to live in a smart, comfortable and safe house and also save energy. With intuitive displays, such as mood controls and the eco-display, you can adapt your electrical installation to your precise requirements. And if you wish to change or expand your controls at a later date, the system flexibility means it's not a problem.

Bus wiring uses cables that carry electricity but also electronic signals. They enable all of the elements of your electrical installation to communicate with one another and make your installation smart. For example, you could use 1 switch in your living room to control the lights in your bedrooms too. The same switch could also be reprogrammed at a later date to turn on the lights in the garden as well.

Filters

Connected controller for Niko Home Control II

The connected controller is the central module of every Niko Home Control installation for bus wiring. This module contains firmware that can only be programmed with the Niko Home Control programming software 2.1.1 or higher. It covers all basic functions on which a Niko Home Control installation is built. The basic functions include: • The intelligence directing the logic to the installation. Through the configuration software, the logic is saved locally on the controller. • The power supply module providing an input voltage of 26 V to the bus, the cabinet modules and the controls. Depending on the size of the installation, separate power supply modules can be added. • The connection to Niko Home Control IP devices such as touchscreens and external video units. A built-in router allows the user to connect up to 3 devices directly to the controller. With an extra switch, this number can be increased. • The connection to the internet. This enables the user to control the installation both indoors and outdoors (via mobile networks such as 3G, 4G, GPRS or Wi-Fi hotspot) using mobile devices (smartphones and tablets with iOS or Android). The module has a TEST button to verify the proper functioning and status of all other modules. Each installation must consist of one connected controller. After registration, your installation is connected, enabling control through the app via your smartphone and tablet, and you can enjoy the Niko services for upgrade or diagnosis of the installation.

Digital black, connected customisable control screen, 24 V

Digital black is a customisable control screen for Niko Home Control with an extremely user-friendly interface with clear symbols. The screen is automatically activated when your hand comes near. That way, you can switch or dim your lights, set scenes, set ventilation modes, and adjust blinds and sunblinds to the desired position in one operation. In short, all possible Niko Home Control control types are available. As this Digital black 24 V variant is equipped with a temperature sensor and algorithm, it can be programmed as a zone-thermostat when linked to a Niko Home Control heating cooling module (550-00150) or switching module (550-00103 or 550-00106) programmed for electrical heating. Do you have an active connection with one of our heating partners? Then you can easily set the temperature with Digital black. When Digital black is used as a thermostat, you define the set points and week programs in the Niko Home app. With the Niko Home app you can choose which controls are displayed or where they are displayed on the screen, but also the way you navigate through your control screens. You can download this app for free in the App store or the Google Play store. Digital black can be easily mounted in any standard flush-mounting box using the familiar claw or screw fixing and is powered by a separate 24 Vdc supply (e.g. 340-00050). The screen communicates via your Wi-Fi network with the rest of your Niko Home Control system. You need an active internet connection to activate Digital black. This internet connection ensures that your Digital black and Niko Home Control installation are always up-to-date and have the most recent functionalities.

Power supply

The power supply, in combination with the connected controller, provides an extra input voltage of 26 V to the bus, modules and controls. An extra power supply is only necessary in installations for which the power of the built-in power supply of the connected controller is insufficient. Up to 2 extra power supplies can be connected to installations with a connected controller. The MASTER button is not used, as the built-in power supply of the connected controller is always the master. For more information on the required number of power supplies, you can consult the installation manual.

Rail coupler

This module is always mounted first on the left at the start of a new row of DIN rail modules that doesn't contain a connected controller or power supply. Interconnect the power supply and bus through the contacts at the top and bottom.

Switching module (3x)

The threefold switching module is suitable for switching a maximum of three different switching circuits, e.g. light points or socket outlets. The module allows you to interconnect one neutral conductor to maintain neat cabling in the cabinet. The module includes three indication LEDs and one status LED. Bistable relays ensure low energy consumption.

Switching module (6x)

The sixfold switching module is suitable for switching a maximum of six different switching circuits, e.g. light points or socket outlets. The module allows you to interconnect two neutral conductors to maintain neat cabling in the cabinet. The module includes six indication LEDs and one status LED. Bistable relays ensure low energy consumption.

Universal dim module (2 x 400 W)

The universal dim module is a DIN module with two channels for dimming light circuits. This module is suitable for incandescent lamps, 230 V halogen lamps, 12 V halogen lamps with a ferromagnetic or electronic transformer, dimmable LED lamps and dimmable economy lamps CFLi. The minimum light intensity and the type of lighting you wish to dim can be manually adjusted. The modules can be placed alongside each other without additional derating.

DALI-2 broadcast module, 2 channels

The DALI-2 broadcast module drives two DALI bus channels concurrently. The two channels are exposed as dimmable light sources in Niko Home Control without the need for any additional configuration or use of DALI programming software. All DALI endpoints will simultaneously react to a Niko Home Control command, meaning that up to 64 endpoints per channel will act as a single dimmable light circuit. The module comes with a built-in power supply, so there is no need to use a dedicated DALI power supply for the DALI bus. Support of DALI device types (control gear): • DT0 (Fluorescent, lamp control gear) • DT1 (Self-contained emergency, control gear) • DT2 (Discharge HID, lamp control gear) • DT3 (Low-voltage halogen, lamp control gear) • DT4 (Incandescent lamp, dimmer) • DT5 (Conversion to D.C. voltage, 1-10 V, 0-10 V converter) • DT6 (LED lamp, control gear) • DT7 (Switching, relay control gear)

DALI-2 addressable module, 2 channels

The DALI-2 fully addressable 2-channel interface module allows up to 128 DALI endpoints to be connected to a Niko Home Control installation. Addressing and programming of the DALI devices is done from within the Niko Home Control programming software, and no prior DALI knowledge is required. Each of the DALI endpoints can be configured and controlled separately, without the need to use any other DALI software or interface. The module comes with a built-in power supply, so there is no need to use a dedicated DALI power supply for the DALI bus. Support of DALI device types (control gear): • DT0 (Fluorescent, lamp control gear) • DT1 (Self-contained emergency, control gear) • DT2 (Discharge HID, lamp control gear) • DT3 (Low-voltage halogen, lamp control gear) • DT4 (Incandescent lamp, dimmer) • DT5 (Conversion to D.C. voltage, 1-10 V, 0-10 V converter) • DT6 (LED lamp, control gear) • DT7 (Switching, relay control gear)

Motor module

The motor module can operate up to three applications that are motor-controlled, such as roll-down shutters, sunblinds and venetian blinds. The module allows you to interconnect two neutral conductors to maintain neat cabling in the cabinet. The module includes six indication LEDs and one status LED. Bistable relays ensure low energy consumption. The run time can be adjusted via the programming software (5 s to 4 min, adjustable per second).

Electricity measuring module (1 channel)

This module is used to measure your overall electricity consumption, solar production and energy consumption of individual devices. All values measured are sent to the Niko Home Control installation and are saved on your connected controller. You can use the measured values to: • monitor electricity consumption, production and self-consumption, by using the Niko Home app • receive notifications in case of abnormal energy consumption, by using smart energy alerts in Niko Home Control • increase your self-consumption, by using the Niko Home Control solar mode to automatically activate appliances in case of excess solar energy • control your peak consumption, by using the Niko Home Control peak mode

Electricity measuring module (3 channels)

This module is used to measure your overall electricity consumption, solar production and energy consumption of individual devices. All values measured are sent to the Niko Home Control installation and are saved on your connected controller. You can use the measured values to: • monitor electricity consumption, production and self-consumption, by using the Niko Home app • receive notifications in case of abnormal energy consumption, by using smart energy alerts in Niko Home Control • increase your self-consumption, by using the Niko Home Control solar mode to automatically activate appliances in case of excess solar energy • control your peak consumption, by using the Niko Home Control peak mode

Pulse counter

The pulse counter allows you to monitor gas, water and electricity consumption or electricity production. The module has three pulse inputs and can be connected to up to three meters. You connect the module to the pulse output of a gas, water or electricity meter. Only one gas meter and one water meter can be connected to each installation. The scale factor of the pulses (e.g. 1 pulse = 10 litres) and the meter type (gas, water or electricity) can be selected via the programming software. Using the touchscreen or control app, residents can easily monitor their consumption or production and detect deviations. The module is provided with one indication LED and one status LED. For a newly constructed dwelling, you can ask the building supervisor to request a gas or water meter with pulse output from the energy supplier.

Heating or cooling module

The heating or cooling module controls the heating or cooling in maximum four zones or rooms. Each zone or room should be equipped with a Niko Home Control thermostat or Digital black used as a thermostat. The module has four outputs to control zone valves (e.g. zone valves at 230 Vac or 24 Vdc) or circulation pumps in four zones or rooms, and one output to set the heating or cooling system to the day or night mode (depending on the heating or cooling request of one of the zones or rooms) Most boilers or cooling units are fitted with an input contact (e.g. a telephone or boiler contact) for this purpose. The module is provided with five indication LEDs and one status LED. Bistable relays ensure low energy consumption. You contact the HVAC installer to have the heating or cooling system fitted with zone valves (e.g. zone valves at 230 Vac or 24 Vdc on the heating collector or radiator) or tunable circulation pumps and to verify the contact of the heating or cooling unit to which the system should be connected.

Ventilation module

The ventilation module controls the central ventilation system via the Niko Home Control installation. The module is suitable for use with whole house ventilation systems (mechanical extract ventilation or mechanical supply and extract ventilation with heat recovery). You connect the ventilation system to this module, instead of connecting it to the three- or four-way switch supplied with the system. The programming software allows you to select when and for how long the ventilation should remain activated for each setting, i.e. low (eco), normal or high. The resident can considerably save energy while maintaining optimum air quality by incorporating the ventilation control in the eco-function (all off) or calendar-based functions, for instance. The module includes three indication LEDs and one status LED. Bistable relays ensure low energy consumption.

Analogue control module 0-10 V

Up to three high-power dimmers can be connected to the Niko Home Control installation using the analogue control module 0-10 V. Useful Niko reference codes: 05-711 and 330-00701.

Analogue control module 1-10 V

Up to three dimmers and/or switching devices can be connected to the Niko Home Control installation using the analogue control module 1-10 V: • dimmers with an analogue input of 1-10 V for dimming monochrome LEDs • electronic control gear for fluorescent lights • high-power dimmers with an analogue input of 1-10 V

Digital potential-free sensor module

The digital potential-free sensor module allows you to connect maximum three sensors equipped with an N.O. contact or an NPN transistor output to the Niko Home Control installation. The connected sensors should be suitable for applications with safety extra-low voltage (SELV). Typical applications include twilight switches, smoke detectors, motion detectors, door communication systems or contacts used in locks, telephone interfaces and alarm installations.

Analogue sensor module

The analogue sensor module allows you to connect three external analogue sensors with an output of 0-10 V to the Niko Home Control installation. These sensors must be suitable for applications with a safety extra-low voltage (SELV), such as sensors for measuring sunlight, wind, rain, CO2, humidity, or temperature. In function of the values measured, applications such as sunblinds, roll-down shutters, and lights can be operated automatically.

Wireless bridge for Niko Home Control

This bus interface enables you to integrate and operate all Niko Home Control products for traditional wiring within a bus wiring installation. This way, the wireless bridge provides you with complete flexibility and allows you to benefit from the full set of Niko Home Control functionalities. You can now easily expand your bus wiring installation with the Niko Home Control devices from the Zigbee® range, which could initially only be used in an installation for traditional wiring with a smart hub. Its clever design allows you to connect the wireless bridge with minimal effort. Simply plug it into the USB port of the connected controller, no need for additional wiring or an external power supply. The configuration can also be performed in the same familiar manner via the user-friendly Niko Home Control programming software. Easily manage and control your installation via the Niko Home app.

USB RF interface for Niko Home Control

The USB RF interface makes it possible to use Niko wireless Easywave controls (with the exception of the remote control 05-312) in the Niko Home Control installation for bus cabling. This allows wireless controls to be installed: • on surfaces unsuited to cabling (e.g. glass or concrete partitions) • for the renovation of heritage-listed buildings • for expansions of existing installations where drilling or channelling work is not permitted • in office areas with movable partition walls • when complex cabling is to be avoided. The interface is shaped like a USB stick and can be connected to the connected controller (550-0000X) in the electrical cabinet, using the provided extension cable (3 m). The end of the extension cable is fitted with an assembly ring allowing the antennae to be attached to the outside of the electrical cabinet for optimal reception.

Wireless measuring module (3 channels)

This module is used to measure your overall electricity consumption, solar production and energy consumption of individual devices. It communicates wirelessly with your Niko Home Control installation. You can use the measured values to: • monitor electricity consumption, production and self-consumption, by using the Niko Home app • receive notifications in case of abnormal energy consumption, by using smart energy alerts in Niko Home Control • increase your self-consumption, by using the Niko Home Control solar mode to automatically activate appliances in case of excess solar energy • control your peak consumption, by using the Niko Home Control peak mode

Single push button with LED and comfort sensors, symbol "leaving the house"

This single push button with the symbol "leaving the house" can be configured to control various actions and routines in a Niko Home Control II installation on bus wiring. It is fitted with programmable LEDs that provide feedback on the action. In addition, the push button can serve as an orientation light when the LEDs are ON. Thanks to its integrated temperature and humidity sensor, the push button also supports multi-zone climate and ventilation control, increasing your energy efficiency and comfort. • Its multi-purpose temperature sensor can be set to control a heating/cooling zone within a Niko Home Control II installation, as a basic thermometer, or to create certain conditions (e.g. control sunscreens) • The humidity sensor can also be used within routines, for example, to perform automatic ventilation control in a bathroom or toilet The push button features an easy click-on mechanism for wall-mounted bus wiring controls and is available in all Niko finishings.

Single push button with LED and comfort sensors

This single push button can be configured to control various actions and routines in a Niko Home Control II installation on bus wiring. It is fitted with programmable LEDs that provide feedback on the action. In addition, the push button can serve as an orientation light when the LEDs are ON. Thanks to its integrated temperature and humidity sensor, the push button also supports multi-zone climate and ventilation control, increasing your energy efficiency and comfort. • Its multi-purpose temperature sensor can be set to control a heating/cooling zone within a Niko Home Control II installation, as a basic thermometer, or to create certain conditions (e.g. control sunscreens) • The humidity sensor can also be used within routines, for example, to perform automatic ventilation control in a bathroom or toilet The push button features an easy click-on mechanism for wall-mounted bus wiring controls and is available in all Niko finishings.