Electronic precharge
The electronic precharge replaces the classic ohmic load and can be easily flush mounted due to the extremely compact housing made of heat-resistant, thermoplastic material. It is safe in all flush-mounting circumstances due to a heating of merely 35 °C higher than the ambient temperature. The electronic precharge is up to 56 % cooler than the normal solutions based on resistances (54% energy-saving compared to the classic ohmic load). It has to be connected in parallel to the primary circuit of the load.
Product details
Electronic pre-charge
This electronic pre-charge can be safely flush-mounted since it does not heat up more than 35°C above the ambient temperature. It is simple to flush mount thanks to an extremely compact housing.
Specification description
Electronic pre-charge
Electronic preload: system that replaces the classic ohmic load. Safe thanks to a heating of only 35°C above the ambient temperature. Up to 56% cooler than normal resistor-based solutions. 54% energy savings compared to classic Ohmic loads. Easy to install due to the compact housing in heat-resistant thermoplast material. To be connected in parallel to the primary circuit of the load. Weight: 0.115Kg. Dimensions: H 65mm x W 48.3mm x D 27.8mm.
- Ambient temperature: -5 – +40 °C
- Protection degree: IP65
- Protection degree: IP65
- Marking: CE
Related products
Rotary dimmer for dimmable LED lamps, 4 – 200 W, 2-wire
Rotary dimmer for dimmable LED lamps in trailing edge. It can also dim incandescent lamps, 230 Vac halogen lamps and low voltage halogen lamps with electronic transformer, two-wire.
Universal rotary dimmer 5 – 325 W, 3-wire
Dimmer for dimmable LED lamps, 230 V halogen lamps, all low-voltage halogen lamps, dimmable economy lamps and incandescent lamps. This dimmer is connected in a three-wire configuration.
Rotary button extension, 3-wire
Rotary button extension for the universal rotary dimmer with PLC interference suppression 5 – 325 W, 3-wire.
