! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Wireless 4-channel constant voltage controller

The 4-channel controller is suitable for controlling LED strips (constant voltage, common anode) from 12 to 24 Vdc. The controller has a maximum power of 50W per channel for 12Vdc LED strips and of 100W per channel for 24Vdc LED strips. The controller can control the following types of LED strips: RGB, RGBW, tunable white and monochrome. We recommend using the specifically designed RGB(W) wall controller in 4-button mode (article numbers 410-00002 + xxx-90002) for controlling the colour LED strips.

Replaces 340-00120 & 340-00121

Produktdetaljer

Denna produkt består av olika delar. Nedan ser du en översikt över de kombinerade artiklarna.
Tekniska datablad
Tekniska manualer

4-kanals LED-kontrollenhet med konstant spänning, trådlös

Type nr.
410-00121

Kontrollenheten med 4 kanaler är lämplig för att styra LED-remsor (konstant spänning, gemensam anod) från 12 till 24 V DC. Kontrollenheten har en maxeffekt på 50 W per kanal för 12 V DC LED-remsor och 100 W per kanal för 24 V DC LED-remsor. Kontrollenheten kan styra följande typer av LED-remsor: RGB, RGBW, inställbart vitt och monokrom. Vi rekommenderar att använda den särskilt utformade RGB(W)-väggkontrollenheten i 4-knappsläge (artikelnummer 410-00002 + xxx-90002) för att styra färg-LED-remsorna.

Ersätter 340-00120 och 340-00121

Specifikationsbeskrivning

  • Input voltage: 12-24V DC
  • Number of LED channels: 4 (R-WW, G-CW, B-WW, W-CW), not individually controlled
  • LED strips type: RGB(W), tunable white, monochrome
  • LED strip setting method: DIP switch
  • LED control type: constant voltage source, common anode
  • Output voltage: 12-24 Vdc per channel
  • Output current: max. 4.2 A per channel
  • Output power: max. 50W (12 Vdc) or 100 W (24 Vdc) per channel
  • Master/slave connection: wired
  • Master/slave mode setting: DIP switch
  • Maximum number of slaves per master: 9
  • Wireless system according to the Easywave protocol
  • Compatible with wireless controls according to the Easywave protocol
  • Supports 1, 2, and 4-button control modes according to the Easywave protocol
  • Specific 4-button LED control: 410-00002 + xxx-90002
  • Number of wireless controls per master: max. 15
  • Programming method: push button and LED feedback
  • Frequency: 868 MHz
  • Maximum radio frequency power: 10 dBm
  • Transmission range: ± 25 m indoors, 100 m in open spaces
  • Primary connection: 1 x 2.5 mm² of 2 x 1.5 mm²
  • Secondary connection: 1 x 1.5 mm²
  • Dimensions: 116 x 52 x 32 mm (HxWxD)
  • Minimum drill diameter: minimum 60 mm
  • Minimum flush-mounting height in suspended ceiling: 170 mm
  • Attachment: 4 screw aperture (diameter 4 mm)
  • Protection degree: IP20
  • Maximum ambient temperature: 45 °C
  • Marking: CE

Relaterade produkter

DIN rail power supply for LED strips, 24 Vdc - 100 W

The power supply is suitable for powering LEDs and is designed for DIN rail mounting. The power supply is equipped with a primary input and four secondary terminals to connect two loads. Usage of screw terminals, both at primary and at secondary side. The output power range is adjustable. In compliance with the European directives for EMC and safety

DIN rail power supply for LED strips, 24 Vdc - 60 W

The 60W power supply is suitable for powering LEDs and is designed for DIN rail mounting. The power supply is equipped with a primary input and four secondary terminals to connect two loads. Usage of screw terminals, both at primary and at secondary side. The output power range is adjustable. In compliance with the European directives for EMC and safety.

Favoriter ( 0 )