! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

DIN rail power supply for LED strips, 24 Vdc - 100 W

The power supply is suitable for powering LEDs and is designed for DIN rail mounting. The power supply is equipped with a primary input and four secondary terminals to connect two loads. Usage of screw terminals, both at primary and at secondary side. The output power range is adjustable. In compliance with the European directives for EMC and safety

Produktdetaljer

Denna produkt består av olika delar. Nedan ser du en översikt över de kombinerade artiklarna.
Tekniska datablad
Tekniska manualer

Modular power supply 24 V DC, 100 W

Type nr.
340-00051

This power supply is suitable for powering LEDs and is designed for DIN-rail mounting. It has a power supply of 100 W. This power supply conforms to the European directive for EMC and safety.

Specifikationsbeskrivning

Modular power supply 24 V DC, 100 W.

  • Maximal belastning: 100 W
  • Primär trådanslutning: dubbel primär terminalanslutning: 1 x 2,5 mm² eller 2 x 1,5 mm² per skruvplint
  • Sekundär trådanslutning: 4-faldig sekundär terminalanslutning: 1 x 2,5 mm² eller 2 x 1,5 mm² per skruvplint
  • Kapslingsklass: IP20
  • Säkerhetsskydd: självåterställande inbyggt skydd mot kortslutning, överbelastning och överhettning
  • Skyddsklass: Klass II-enhet: SELV (säkerhetsklenspänning), oberoende enhet
  • Användning: endast för inomhusbruk
  • DIN-mått: DIN 4TE
  • Mått: 90 x 70 x 55 mm
  • Märkning: CE

Relaterade produkter

Wireless 4-channel constant voltage controller

The 4-channel controller is suitable for controlling LED strips (constant voltage, common anode) from 12 to 24 Vdc. The controller has a maximum power of 50W per channel for 12Vdc LED strips and of 100W per channel for 24Vdc LED strips. The controller can control the following types of LED strips: RGB, RGBW, tunable white and monochrome. We recommend using the specifically designed RGB(W) wall controller in 4-button mode (article numbers 410-00002 + xxx-90002) for controlling the colour LED strips. Replaces 340-00120 & 340-00121

DIN rail power supply for LED strips, 24 Vdc - 60 W

The 60W power supply is suitable for powering LEDs and is designed for DIN rail mounting. The power supply is equipped with a primary input and four secondary terminals to connect two loads. Usage of screw terminals, both at primary and at secondary side. The output power range is adjustable. In compliance with the European directives for EMC and safety.

Favoriter ( 0 )