Electricity measuring module (1 channel)
This module is used to measure your overall electricity consumption, solar production and energy consumption of individual devices. All values measured are sent to the Niko Home Control installation and are saved on your connected controller.
You can use the measured values to:
- monitor electricity consumption, production and self-consumption, by using the Niko Home app
- receive notifications in case of abnormal energy consumption, by using smart energy alerts in Niko Home Control
- increase your self-consumption, by using the Niko Home Control solar mode to automatically activate appliances in case of excess solar energy
- control your peak consumption, by using the Niko Home Control peak mode
Product details
Electricity measuring module (1 channel) for Niko Home Control
This module is used to measure your overall electricity consumption, solar production and energy consumption of individual devices. All values measured are sent to the Niko Home Control installation and are saved on your connected controller.
You can use the measured values to:
- monitor electricity consumption, production and self-consumption, by using the Niko Home app
- receive notifications in case of abnormal energy consumption, by using smart energy alerts in Niko Home Control
- increase your self-consumption, by using the Niko Home Control solar mode to automatically activate appliances in case of excess solar energy
- control your peak consumption, by using the Niko Home Control peak mode
This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.
Specification description
Electricity measuring module (1 channel) for Niko Home Control.
- Function: • Measuring of:
- total electricity consumption of the home that is connected to a single-phase supply network
- amount of electricity generated by photovoltaic solar panels
- consumption of specific circuits, such as the upper floor of a home
- consumption of individual devices, such as heat pumps, heat pump boilers, air conditioning and EV chargers
- Measuring via:
- 1 current clamp to measure the electrical current in a conductor
- connection terminals to measure the voltage of the phase
- Measured data available in app
- Measurement range: 5 – 14500 W, 22 mA – 63 A
- Accuracy: IEC62053-21 class 1 (R), class 2 (L)
- Maximum cable size in the current clamp: 1 x 10 mm² or 6 x 2.5 mm² or 9 x 1.5 mm²
- Length of the connector cable to the current clamp: 100 cm
- Not suitable for measuring direct current components
- Measuring data for information purposes only, not valid for invoicing
- Sliding contact to connect the module to the following module on the DIN rail
- Energy: optimise energy consumption
- Input voltage: 230 Vac ± 10 %, 50 Hz
- Maximum MCB rating: 20 A (limited by national installation rules)
- Connection terminals: 4 connection terminals to measure the voltage of the connected circuit and 2 connection terminals to connect the current clamp included
- Wire capacity
- 3 x 1.5 mm² of 2 x 2.5 mm² or 1 x 4 mm² wire per terminal
- DIN dimensions: 2U
- Dimensions (HxWxD): 90 x 35 x 66 mm
- Marking: CE
Accessories
Current clamp 120 A
For use with the Niko Home Control measuring modules 550-00801 and 550-00803.
Specification description
Current clamp 120 A
- for use with the Niko Home Control measuring modules 550-00801 and 550-00803
- expands the measuring range of the measuring modules up to 90 - 27600 W, 400 mA – 120 A per channel
- specify the type of current clamp during programming
- can be locked/unlocked up to ± 100 times
- length of the connector cable at the current clamp: 100 cm (may not be shortened or lengthened)
- maximum cable thickness for the current clamp: 4 x 10 mm² or 12 x 2.5 mm² or 20 x 1.5 mm²
- accuracy: IEC62053-21 class 1 (R), class 2 (L)
- minimum insulation resistance: 100 MΩ (between core and output terminals)
- weight: 75 g
- ambient temperature: -20 - 50°C
- dimensions: 55 x 29.5 x 31 mm (HxWxD)
- CE marked
- Dimensions (HxWxD): 323 mm
- Marking: CE
Related products
Connected controller for Niko Home Control II
The connected controller is the central module of every Niko Home Control installation for bus wiring. This module contains firmware that can only be programmed with the Niko Home Control programming software 2.1.1 or higher. It covers all basic functions on which a Niko Home Control installation is built. The basic functions include: • The intelligence directing the logic to the installation. Through the configuration software, the logic is saved locally on the controller. • The power supply module providing an input voltage of 26 V to the bus, the cabinet modules and the controls. Depending on the size of the installation, separate power supply modules can be added. • The connection to Niko Home Control IP devices such as touchscreens and external video units. A built-in router allows the user to connect up to 3 devices directly to the controller. With an extra switch, this number can be increased. • The connection to the internet. This enables the user to control the installation both indoors and outdoors (via mobile networks such as 3G, 4G, GPRS or Wi-Fi hotspot) using mobile devices (smartphones and tablets with iOS or Android). The module has a TEST button to verify the proper functioning and status of all other modules. Each installation must consist of one connected controller. After registration, your installation is connected, enabling control through the app via your smartphone and tablet, and you can enjoy the Niko services for upgrade or diagnosis of the installation.
Digital black, connected customisable control screen, 24 V
Digital black is a customisable control screen for Niko Home Control with an extremely user-friendly interface with clear symbols. The screen is automatically activated when your hand comes near. That way, you can switch or dim your lights, set scenes, set ventilation modes, and adjust blinds and sunblinds to the desired position in one operation. In short, all possible Niko Home Control control types are available. As this Digital black 24 V variant is equipped with a temperature sensor and algorithm, it can be programmed as a zone-thermostat when linked to a Niko Home Control heating cooling module (550-00150) or switching module (550-00103 or 550-00106) programmed for electrical heating. Do you have an active connection with one of our heating partners? Then you can easily set the temperature with Digital black. When Digital black is used as a thermostat, you define the set points and week programs in the Niko Home app. With the Niko Home app you can choose which controls are displayed or where they are displayed on the screen, but also the way you navigate through your control screens. You can download this app for free in the App store or the Google Play store. Digital black can be easily mounted in any standard flush-mounting box using the familiar claw or screw fixing and is powered by a separate 24 Vdc supply (e.g. 340-00050). The screen communicates via your Wi-Fi network with the rest of your Niko Home Control system. You need an active internet connection to activate Digital black. This internet connection ensures that your Digital black and Niko Home Control installation are always up-to-date and have the most recent functionalities.
Power supply
The power supply, in combination with the connected controller, provides an extra input voltage of 26 V to the bus, modules and controls. An extra power supply is only necessary in installations for which the power of the built-in power supply of the connected controller is insufficient. Up to 2 extra power supplies can be connected to installations with a connected controller. The MASTER button is not used, as the built-in power supply of the connected controller is always the master. For more information on the required number of power supplies, you can consult the installation manual.
