! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Accent lighting

LED lamps hardly use energy. They provide a lot of light and last for dozens of years. With LED lighting you can also create the atmosphere you want for your home. You can light the worktop of your kitchen, your bookcase or your bathroom cabinet. Or you highlight a photo on the wall, your nightstand or a figurine.

As LED lighting does not heat up, you can leave it on all night. Ideal as orientation lighting in the rooms of your children, in the hallway or in the staircase.

Filters

Wireless 4-channel constant voltage controller

The 4-channel controller is suitable for controlling LED strips (constant voltage, common anode) from 12 to 24 Vdc. The controller has a maximum power of 50 W per channel for 12 Vdc LED strips and of 100 W per channel for 24 Vdc LED strips. The controller can control the following types of LED strips: RGB, RGBW, tunable white and monochrome. We recommend using the specifically designed RGB(W) wall controller in four button mode (article numbers 410-00002 + XXX-90002) for controlling the colour LED strips.

PWM dimmer, 100 W

The PWM dimmer will be used to dim LED strips with monochrome LEDs, up to a maximum capacity of 100 W. The light intensity is dimmed linearly by using an N.O. push button. Press the N.O. push button briefly for switching on and off, and hold it down for brightening and dimming the light.

DIN rail power supply for LED strips, 24 Vdc, 100 W

The power supply is suitable for DIN rail mounting. The power supply is equipped with a primary input and four secondary terminals to connect two loads. Usage of screw terminals, both at primary and at secondary side. The output power range is adjustable. In compliance with the European directives for EMC and safety

DIN rail power supply for LED strips, 24 Vdc, 2.5 A/60 W

The 60 W power supply is suitable for DIN rail mounting. The power supply is equipped with a primary input and four secondary terminals to connect two loads. Usage of screw terminals, both at primary and at secondary side. The output power range is adjustable.

Orientation lighting with white LEDs, 830 lux, 6500 K

Orientation lighting with backup battery and white LEDs, 830 lux, 6500 K

Suitable for indoor use. In case of a power failure, the integrated backup battery takes over for a period of 15 minutes.

Orientation lighting with warm white LEDs, 360 lux, 2800 K

Orientation lighting with white LEDs, 2100 lux, 6500 K

Orientation lighting with blue LEDs, 270 lux

Orientation lighting with red LEDs, 460 lux

Orientation lighting with green LEDs, 900 lux

RGB controller, max. 50 W

The RGB controller will be used to control Niko LED strips with RGB LEDs, up to a maximum capacity of 50 W. In addition to the on/off function, there are two modes that can be selected with an N.O. push button. Press the N.O. push button briefly for running through the different modes (on, fade, fixed colour, off), and hold it down for adjusting the speed of the ‘fade’ mode or the intensity of the ‘fixed colour’ mode.