Detector, 360°, 230 Vac with 2 potential-free contacts (10 A)
for flush-mounting in ceilings. 350-41620: standalone or as master combinable with a maximum of 20 slaves (350-41601). Easy installation. The detector has a very flat design of only 5 mm, so that it can be mounted almost flush with the ceiling. Particularly suitable for the switching of installations with 3 phases where the light circuits need to be distributed to several groups for safety reasons.
For use in offices, schools, conference rooms…
in large and small spaces. The two contacts are always controlled simultaneously. Depending on the chosen application:
- the lighting must always be switched on manually with a
push button, the light is automatically switched off when
there is sufficient daylight or no one is in the room
- the lighting is switched on automatically when movement is registered and
in case of insufficient daylight. Also here the lighting is automatically
switched off if there is sufficient daylight or no one is in the room (presence detector). Lighting will remain on
as long as motion is detected and the measured daylight level
is lower than the set value. When a push button is used, upon leaving the room the user can decide to switch off the light immediately (eco off) instead of waiting for the switch-off delay. The light remains switched off, even if
movement is still detected in the room. After the set switch-off delay
has elapsed, the detector resumes its normal operation. The switch-off delay, the lux value at which the lighting must switch on and the sensitivity of the detector are easily set with the IR remote control (optional). IR remote control for fast and easy programming (optional).