Home Partners windows

Open and close windows and sun blinds automatically

The brands that we integrate

Velux Reynaert

Connect your windows with Niko Home Control

 

To control your Niko Home Control partner brand’s windows, curtains and roll-down shutters, you will need a smart device from that particular partner. More information can be found in the technical details.

The connection to such devices can be activated on mynikohomecontrol.niko.eu. Once activated, your Niko Home Control installation will start to communicate with your partner system and you will also be able to create advanced actions.

Niko makes every effort to ensure the connection process runs as smoothly as possible. Due to technical differences between the brands, there may be differences in functions and options. Connection to these partners is only possible when Niko Home Control is installed using bus cabling.

Which partner devices are compatible?

  • Velux:
    • INTEGRA windows and accessories, Velux KLF 200 module (connection to Niko Home Control)
  • Reynaers
    • HI-FINITY windows, compatible with “Reynaers interconnecting module”

 

   Velux  Reynaers
 Opening, closing and stopping windows
 Viewing window status

 

Which partner devices are compatible?

  • Velux
    INTEGRA ramen en accessoires, Velux KLF200 module (connecteren met Niko Home Control)
  • Reynaers
    HiFINITY ramen, compatibel met “Reynaers-tussenmodule”

  

Velux  

You will need the following

  • INTEGRA windows and accessories in combination with a VELUX KLF 200 module
  • Niko Home Control for bus cabling with programming software version 2.1 onwards
  • a Niko Home Control switching module with 2 free outputs for each device you want to connect
  • an SVV cable with a minimum of 12 conductors between the cabinet and the KLF 200 module

Conditions

  • you can control a maximum of 5 devices or groups per KLF 200 module
  • the KLF 200 module is ideally located near your Velux windows

Reynaert

Have you chosen electric sliding windows from Reynaers? You can connect them to Niko Home Control using the Reynaers interconnecting module. With the press of a button, you can open or close the windows or put them in a specific position.

You will need the following

  • Hi-Finity windows in combination with a Reynaers interconnecting module
  • Niko Home Control for bus cabling with programming software version 2.1 onwards
  • a Niko Home Control switching module with 2 free outputs per window
  • 1 Niko Home Control digital potential-free sensor module to read the feedback
  • an SVV cable with a minimum of 5 wires between the switching module and the interconnecting module
  • 1 roller blind control per window

 

Integrator API 

Niko Home Control
Software