! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Modular dimmer 450 VA

Reference code
05-704

No longer available since August 2019

Technical manuals
Certificaten CE-Marking

Description

This 450 VA modular dimmer is used for incandescent lamps, 230 V halogen lamps and low-voltage halogen lamps with ferromagnetic transformers or toroidal core transformers. You control the dimmer with a push button. The dimmer can be used with or without the memory function.

Specification description

Modular dimmer 450 VA.

  • Function: Modular remote dimmer with leading edge for resistive and inductive loads (also mixed loads). Multiple control points with N.O. push buttons in parallel. Interference suppression of the push button input. Connection of the push buttons in various configurations is possible. A brief press of the button switches the light on or off. A longer press (hold) commands the dimming operation. A renewed press reverses the direction of the dimming. Use with or without memory can be set using the push button input. Non-volatile memory. The degree of interference suppression complies with the European standard EN 55015. Available in a pack of 10 units (05-704-19)
  • Minimum load: 40 W/50 VA
  • Maximum load ferromagnetic transformer: 450 VA
  • Maximum load toroidal core transformer: 450 VA
  • PLC interference suppression: this dimmer is equipped with interference suppression of PLC signals (frequency dips up to 3 Hz). This integrated interference suppression attempts to remove as many interfering signals as possible from the mains in order for most lamps to function optimally, without flashing or humming.
  • Protection from overload: thermal overload protection with automatic reset function
  • Short circuit proof: short circuit protection via fuse Built-in spare fuse.
  • Capacity reduction: at an ambient temperature above 35°C the maximum load will decrease by 5 % per 5 °C
  • Wire capacity
    • 2 x 1.5 mm² or 1 x 2.5 mm² per connection terminal
  • Input voltage: 230 Vac ± 10 %, 50 Hz
  • Connection terminals: 2 connection terminals on top and 2 connection terminals underneath
  • DIN dimensions: 1U
  • Marking: CE

Select a product below to view related articles, variants or accessories:

Favorites ( 0 )