! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Wireless switch with two buttons

This wireless switch with two buttons can be used by a wireless receiver from the Easywave range. It can be used as one dual-button control (upper=on, lower=off), or as two one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation for bus wiring in combination with the USB RF interface Easywave (410-00099) for Niko Home Control or in the Niko Home Control installation for traditional wiring in combination with the wireless smart hub (552-00001).

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals
End user manuals
Certificaten CE-Marking

Base for wireless switch with 2 control buttons

Reference code
410-00001

With this wireless switch, you control a maximum of 2 circuits, independent of one another, but dependent on the receiver settings. The switch is used for 1-button and 2-button functions.

Specification description

Base for wireless switch with 2 control buttons.

  • Each transmitter can control an unlimited number of receivers
  • Each receiver can be controlled by up to 32 transmitters
  • Transmission range: max. 30 meters indoors, 100 meters in the open area
  • Modulation type: FSK
  • Supplied complete with battery and pre-programmed send address
  • Buttons and faceplate to be ordered separately
  • Power supply: via battery 3 V DC (included)
  • Mounting: with the supplied adhesive strips or screws
  • Frequency band: 868,0 – 868,6MHz
  • Communication protocol: Easywave®
  • Maximum radio frequency power: -1.3 dBm
  • Operating frequency: 0.8683 GHz
  • Dimensions (HxWxD): 71 x 103 mm
  • Weight: 20 g
  • Marking: CE

Base for mounting a wireless switch in a flush-mounting box, claw fixing

Reference code
410-00021

Base with claw fixing for the mounting a wireless switch in a flush-mounting box. This base makes it possible to install a wireless switch in a flush-mounting box. You can

click it together and combine it with one or more flush-mounting mechanisms from Niko.

Base for mounting a wireless switch in a flush-mounting box, screw fixing

Reference code
410-00022

Base with screw fixing for the mounting a wireless switch in a flush-mounting box. This base makes it possible to install a wireless switch in a flush-mounting box. You can

click it together and combine it with one or more flush-mounting mechanisms from Niko.

Single key for wireless switch or push button with 2 control buttons, cream

Reference code
100-00001

Single key for wireless switch or bus push button with 2 control buttons. Finishing colour: cream.

  • 100-00001
    Colour cream
    Reference code 100-00001
  • 101-00001
    Colour white
    Reference code 101-00001
  • 102-00001
    Colour light grey
    Reference code 102-00001
  • 104-00001
    Colour greige
    Reference code 104-00001
  • 121-00001
    Colour sterling
    Reference code 121-00001
  • 122-00001
    Colour anthracite
    Reference code 122-00001
  • 123-00001
    Colour bronze
    Reference code 123-00001
  • 124-00001
    Colour dark brown
    Reference code 124-00001
  • 154-00001
    Colour white coated
    Reference code 154-00001
  • 157-00001
    Colour champagne coated
    Reference code 157-00001
  • 161-00001
    Colour black coated
    Reference code 161-00001
  • 200-00001
    Colour piano black coated
    Reference code 200-00001
  • 220-00001
    Colour steel grey coated
    Reference code 220-00001
  • 221-00001
    Colour gold coated
    Reference code 221-00001

Single key with 'I' and '0' symbols for wireless switch or push button with two control buttons

Reference code
100-00002

Single key with the symbol 'I' and '0' for a wireless switch or bus push button with two control buttons. Finishing colour: cream.

  • 100-00002
    Colour cream
    Reference code 100-00002
  • 101-00002
    Colour white
    Reference code 101-00002
  • 102-00002
    Colour light grey
    Reference code 102-00002
  • 104-00002
    Colour greige
    Reference code 104-00002
  • 121-00002
    Colour sterling
    Reference code 121-00002
  • 122-00002
    Colour anthracite
    Reference code 122-00002
  • 123-00002
    Colour bronze
    Reference code 123-00002
  • 124-00002
    Colour dark brown
    Reference code 124-00002
  • 154-00002
    Colour white coated
    Reference code 154-00002
  • 157-00002
    Colour champagne coated
    Reference code 157-00002
  • 161-00002
    Colour black coated
    Reference code 161-00002
  • 200-00002
    Colour piano black coated
    Reference code 200-00002
  • 220-00002
    Colour steel grey coated
    Reference code 220-00002
  • 221-00002
    Colour gold coated
    Reference code 221-00002

Single key with 'up' and 'down' arrows for wireless switch or push button with 2 control buttons, steel grey coated.

Reference code
220-00004

A single key with the symbol 'up' and 'down' for a wireless switch or bus push button with 2 control buttons. Finishing colour: steel grey coated.

  • 100-00004
    Colour cream
    Reference code 100-00004
  • 101-00004
    Colour white
    Reference code 101-00004
  • 102-00004
    Colour light grey
    Reference code 102-00004
  • 104-00004
    Colour greige
    Reference code 104-00004
  • 121-00004
    Colour sterling
    Reference code 121-00004
  • 122-00004
    Colour anthracite
    Reference code 122-00004
  • 123-00004
    Colour bronze
    Reference code 123-00004
  • 124-00004
    Colour dark brown
    Reference code 124-00004
  • 154-00004
    Colour white coated
    Reference code 154-00004
  • 157-00004
    Colour champagne coated
    Reference code 157-00004
  • 161-00004
    Colour black coated
    Reference code 161-00004
  • 200-00004
    Colour piano black coated
    Reference code 200-00004
  • 220-00004
    Colour steel grey coated
    Reference code 220-00004
  • 221-00004
    Colour gold coated
    Reference code 221-00004

Single key with text field for wireless switch or push button with 2 control buttons, steel grey coated.

Reference code
220-00006

A single key with space to add a text for a wireless switch or push button with two control buttons. Finishing colour: steel grey coated.

  • 100-00006
    Colour cream
    Reference code 100-00006
  • 101-00006
    Colour white
    Reference code 101-00006
  • 102-00006
    Colour light grey
    Reference code 102-00006
  • 104-00006
    Colour greige
    Reference code 104-00006
  • 121-00006
    Colour sterling
    Reference code 121-00006
  • 122-00006
    Colour anthracite
    Reference code 122-00006
  • 123-00006
    Colour bronze
    Reference code 123-00006
  • 124-00006
    Colour dark brown
    Reference code 124-00006
  • 154-00006
    Colour white coated
    Reference code 154-00006
  • 157-00006
    Colour champagne coated
    Reference code 157-00006
  • 161-00006
    Colour black coated
    Reference code 161-00006
  • 200-00006
    Colour piano black coated
    Reference code 200-00006
  • 220-00006
    Colour steel grey coated
    Reference code 220-00006
  • 221-00006
    Colour gold coated
    Reference code 221-00006

Related products

Wireless smart hub for Niko Home Control

The wireless smart hub for Niko Home Control is the brain of the installation. It allows you to connect all connected devices in your installation to the system. Once you have added them, you can easily control them with your smartphone. With the programming software, you can also add extensive functionalities such as scenes, all-off actions or presence simulation. The smart hub always needs to be used in combination with the Niko Home Control programming software.

USB RF interface

The USB RF interface makes it possible to use Niko wireless Easywave controls (with the exception of the remote control 05-312) in the Niko Home Control installation for bus cabling. This allows wireless controls to be installed: • on surfaces unsuited to cabling (e.g. glass or concrete partitions) • for the renovation of heritage-listed buildings • for expansions of existing installations where drilling or channelling work is not permitted • in office areas with movable partition walls • when complex cabling is to be avoided. The interface is shaped like a USB stick and can be connected to the connected controller (550-0000x) in the electrical cabinet, using the provided extension cable (3 m). The end of the extension cable is fitted with an assembly ring allowing the antennae to be attached to the outside of the electrical cabinet for optimal reception.

Niko dimmer switch for Hue system

With this wireless and battery-free dimmer switch, you can effortlessly operate Philips Hue lamps. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating scene settings). No wall breaking or cable installation is needed. The dimmer switch can be mounted on a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). Please note that Philips Hue Bridge v2 is required and not included.

Favorites ( 0 )