Wireless switch with four buttons
This wireless switch with four buttons can be used by a smart switch or a wireless receiver. It can be used as a two dual-button controls (upper:on, lower off) or as four one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation in combination with the Niko Home Control RF interface Easywave.
Product details
Base for wireless switch with 4 control buttons
With this wireless switch, you control a maximum of 4 circuits, independent of one another, but dependent on the receiver settings. You use the switch for 1-key, 2-key and 4-key functions.
Technical characteristics:
- power supply voltage: battery, 3V DC (supplied);
- transmission range: approximately 30 meters indoors, 100 meters in open spaces;
- mounting: with the adhesive strips or screws provided.
- frequenty band: 868,0 – 868,6MHz
- maximum power output: -3,25 dBm
Specification description
Base for wireless switch with 4 control buttons. Wall-mounted transmitter with 4 connections with RF technology for wireless remote control of Niko RF receivers on the frequency 868.3MHz. Each transmitter can control an unlimited number of receivers. Each receiver can be controlled by a maximum of 32 transmitters. Minimum transmission range in a building: 30m; in open spaces: 100m. Modulation type: FSK. Supplied complete with battery and pre-programmed transmitter address. Buttons and flush surround plates are to be ordered separately. Battery type: Renata 3V/270mAh CR2430; Saft 3V/270mAh LM2430; Varta 3V/260mAh CR2430; Panasonic 3V/250mAh CR2330. Can be either stuck or screwed to the wall or flush-mounting box. In compliance with Belgian and European legislation: CE marking on the device. Complies with the EN60669-2-1 standard, the EC legislation and meets the essential requirements of the R&TTE Directive 1999/5/EC. Can be used in all European Member States. User manual is included with the registration.
- Dimensions (HxWxD): 71 x 103 mm
- Marking: CE
Base for the mounting of a wireless switch on a flush-mounting box, claw fixing
Base with claw fixing for the mounting of a wireless switch on a flush-mounting box. This base makes it possible to install a wireless switch on a flush-mounting box. You can
click it together and combine it with one or more flush-mounting mechanisms from Niko.
Base for the mounting of a wireless switch on a flush-mounting box, screw fixing
Base with screw fixing for the mounting of a wireless switch on a flush-mounting box. This base makes it possible to install a wireless switch on a flush-mounting box. You can
click it together and combine it with one or more flush-mounting mechanisms from Niko.
Double key for wireless switch or push button with 4 control buttons, cream.
A double key for a bus push button. Finishing colour: cream.
Double key with 'I' and '0' symbols for wireless switch or push button with 4 control buttons
A double key with the symbol "I" and "0" for a bus push button. Finishing colour: cream.
Double key with 'up' and 'down' arrows for wireless switch or push button with 4 control buttons, alu grey coated.
A double key with the symbols up and down, for a bus push button. Finishing colour: alu grey coated.
Double key with text field for wireless switch or push button with 4 control buttons, alu gold coated.
A double switch with space for the addition of your own text for a bus push button. Finishing colour: alu gold coated.
Double key with ventilator symbols 0 to 3 for wireless switch or push button with 4 control buttons
A double key for ventilator operation for a bus push button. Finishing colour: champagne coated.
Accessories
Set of claws for wall-mounted printed circuit board
This set of claws is used to attach wall-mounted circuit boards to standard flush-mounting boxes without the use of screws.
Specification description
This set of claws is used to attach wall-mounted circuit boards to standard flush-mounting boxes without the use of screws.
Related products
Niko dimmer switch for Hue system
With this wireless and battery-free dimmer, you can operate the Philips Hue lamps effortlessly. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating mood settings). Mechanism including button and Niko Original or Intense flush surround plate.
Wireless switch with two buttons
This wireless switch with two buttons can be used by a smart switch or a wireless receiver. It can be used as one dual-button control (upper=on, lower=off), or as two one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation in combination with the Niko Home Control RF interface Easywave.
Smart single switch with push button and RF extensions, 10 A
The smart switch has a switching contact to switch lighting on and off. It has a transmitter and receiver operating according to the Easywave protocol. If desired, extra controls can be added. These could be both classic wired push buttons and wireless controls according to the Easywave protocol. By doing so, it can effortlessly replace any traditional single, multiway, or intermediate switching. This makes the smart switch especially suitable for renovation projects or listed building interiors in which drilling or channelling work should be avoided. Please note, the only condition for the use of the smart switch is the presence of the neutral conductor in the flush-mounting box where the smart switch will be placed. Besides being able to switch its own contact, the smart switch is also able to switch other receivers operating according to the Easywave protocol. This function can also be incorporated in a mood setting/preset. In doing so, you can switch all lighting included in the mood setting/preset with one push of the button. It is fitted with a feedback LED of which the behaviour can be adapted to the needs of the user.