! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Wireless receiver for motor control, for flush mounting

This mini receiver with switching contact (4 A/230 Vac) is used to control roll-down shutters or venetian/vertical blinds. The receiver can be operated by both wall-mounted and hand-held transmitters in a dual-button mode for the roll-down shutter functions (open, stop and close) or in a dual-button mode for the rotation of the vertical blinds. Thanks to its limited dimensions, it is easily flush mounted.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Certificaten CE-Marking

Flush-mounting RF receiver with roller shutter function

Reference code
05-333

This mini-receiver is used to control roller shutters and blinds. It is very easy to mount due to its compact dimensions. It works with both wall-mounted and hand-held transmitters. The run time is 90 seconds. With the 2-button mode, you can:

  • open, close and stop the roller shutters and blinds;
  • turn the vertical blind slats.

Specification description

Flush-mounting RF receiver with roller shutter function

  • Not compatible with the wireless bridge, nor with the wireless smart hub
  • Maximum MCB rating: 6 A (limited by national installation rules)
  • Communication protocol: Easywave
  • Operating frequency: 0.8683 GHz
  • Weight: 76 g
  • Dimensions (HxWxD): 49 x 70 x 29 mm
  • Marking: CE

Finishing set for a 1-channel flush-mounting RF receiver with single-pole (potential-free) switching contact or flush-mounting RF receiver with roller blind function, cream

Reference code
100-77001

Finishing set for a 1-channel flush-mounting RF receiver with single-pole (potential-free) switching contact or for a flush-mounting RF receiver with roller blind function. Finishing colour: cream.

  • 100-77001
    Colour cream
    Reference code 100-77001
  • 101-77001
    Colour white
    Reference code 101-77001
  • 102-77001
    Colour light grey
    Reference code 102-77001
  • 121-77001
    Colour sterling coated
    Reference code 121-77001
  • 122-77001
    Colour anthracite coated
    Reference code 122-77001
  • 123-77001
    Colour bronze coated
    Reference code 123-77001
  • 124-77001
    Colour dark brown coated
    Reference code 124-77001
  • 154-77001
    Colour white coated
    Reference code 154-77001
  • 157-77001
    Colour champagne coated
    Reference code 157-77001
  • 161-77001
    Colour black coated
    Reference code 161-77001
  • 200-77001
    Colour piano black coated
    Reference code 200-77001
  • 220-77001
    Colour blue grey coated
    Reference code 220-77001
  • 221-77001
    Colour gold coated
    Reference code 221-77001

Related products

Niko dimmer switch for Hue system

With this wireless and battery-free dimmer switch, you can effortlessly operate Philips Hue lamps. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating scene settings). No wall breaking or cable installation is needed. The dimmer switch can be mounted on a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). Please note that Philips Hue Bridge v2 is required and not included.

Niko dimmer switch, KNX®

This wireless and battery-free dimmer switch in Niko design can operate as a switch, a dimmer, a roller shutter control or a scene selector in a KNX® system. This dimmer switch works together with the KNX® wireless media coupler (360-33001) who transmits the KNX® commands to the KNX® bus. This allows you to easily extend a KNX® system without breaking walls or installing extra cables. Configure the dimmer switch buttons with the ETS software that is available on the KNX® Association website together with the KNX® programming adapter (360-39001). The following communication objects can be linked to the buttons: single channel, dimming and shutter control. The supported functions are: on, off, toggle, up, down, darker, brighter, scene number, send value in percentage, in angle, in 2 bits, in 8 bits. Up to six button combinations can be configured. The dimmer switch can be mounted into a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive tape (included).

Niko dimmer switch, EnOcean®

With this wireless and battery-free dimmer switch in Niko design, you can remotely operate EnOcean® certified wireless receivers (e.g. presence detectors with EnOcean® interface). No wall breaking or cable installation is needed. The pairing procedure with a wireless receiver determines the function of each button. Up to four buttons can be configured. The dimmer switch can be mounted in a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included).

Favorites ( 0 )