Wireless mini hand-held transmitter with 1 channel and 4 control buttons
This hand-held transmitter has four independent control buttons and can be used in combination with all Niko receivers. A different function can be assigned to every control button. Visual feedback of the control via an LED. The battery is supplied with the transmitter. The hand-held transmitter can also be used in the Niko Home Control installation in combination with the Niko Home Control RF interface Easywave.
In combination with the Niko Home Control RF interface, the hand-held transmitter can also be used in Niko Home Control installations.
Product details
Mini hand-held RF transmitter with 1 channel and 4 control buttons
This mini-transmitter has 1 functional control button. You can use it in combination with all Niko receivers. The operation status is indicated with LEDs. The device is especially well suited for the care sector (e.g. alarm function) or in homes. The battery is supplied with the transmitter.
Technical characteristics:
- power supply voltage: battery, 3V DC (supplied);
- transmission range: approximately 30 meters indoors, 100 meters in open spaces;
- dimensions: L62xW37xD11mm
- frequenty band: 868,0 – 868,6MHz
- maximum power output: 0,60 dBm
Related products
Niko dimmer switch for Hue system
With this wireless and battery-free dimmer, you can operate the Philips Hue lamps effortlessly. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating mood settings). Mechanism including button and Niko Original or Intense flush surround plate.
Double wireless push button
This wireless switch with two buttons can be used by a smart switch or a wireless receiver. It can be used as one dual-button control (upper=on, lower=off), or as two one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation in combination with the Niko Home Control RF interface Easywave.
Smart single switch with push button and RF extensions, 10 A
The smart switch has a switching contact to switch lighting on and off. It has a transmitter and receiver operating according to the Easywave protocol. If desired, extra controls can be added. These could be both classic wired push buttons and wireless controls according to the Easywave protocol. By doing so, it can effortlessly replace any traditional single, multiway, or intermediate switching. This makes the smart switch especially suitable for renovation projects or listed building interiors in which drilling or channelling work should be avoided. Please note, the only condition for the use of the smart switch is the presence of the neutral conductor in the flush-mounting box where the smart switch will be placed. Besides being able to switch its own contact, the smart switch is also able to switch other receivers operating according to the Easywave protocol. This function can also be incorporated in a mood setting/preset. In doing so, you can switch all lighting included in the mood setting/preset with one push of the button. It is fitted with a feedback LED of which the behaviour can be adapted to the needs of the user.