! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Wireless mini hand-held transmitter with 1 channel and 1 control button

This hand-held transmitter has one control button and can be used in combination with every Niko receiver. One function can be assigned to the control button. Visual check of the control via a LED. For use in a residential environment. Battery supplied.

In combination with the Niko Home Control USB RF interface (410-00099), the hand-held transmitter can also be used in Niko Home Control installations.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals
Certificaten CE-Marking

Mini hand-held RF transmitter with 1 channel and 1 control button

Reference code

This mini transmitter has 1 functional control button. You can use it in combination with all Niko receivers. The operation status is indicated with LEDs. The device is especially well suited for the care sector (e.g. alarm function) or in homes. The battery is supplied with the transmitter.

Technical characteristics:

  • power supply voltage: battery, 3V DC (supplied);
  • transmission range: max 30 meters indoors, 100 meters in open spaces;
  • dimensions: L56xW36xD16mm.
  • frequenty band: 868,0 – 868,6MHz
  • maximum power output: -10,50 dBm

Specification description

Mini hand-held RF transmitter with 1 channel and 1 control button

Mini transmitter with RF technology for wireless remote control of Niko RF receivers on frequency 868.3MHz One channel that can control one or more Niko RF receivers. Dimensions: 56 x 36 x 16mm. Red LED: indication of operation and check for the battery. max. transmission range in a building 30 m; in open field: 100 m. Modulation type: FSK. Battery type: 3V CR2032. In accordance with Belgian and European legislation: CE mark on device. This product complies with all applicable European directives and regulations. For radio equipment, Niko nv declares that it complies with Directive 2014/53/EU. May be used in all European member states. Manual is included

  • Communication protocol: Easywave®
  • Marking: CE

Related products

Wireless smart hub for Niko Home Control

The wireless smart hub for Niko Home Control is the brain of the installation. It allows you to connect all connected devices in your installation to the system. Once you have added them, you can easily control them with your smartphone. With the programming software, you can also add extensive functionalities such as scenes, all-off actions or presence simulation. The smart hub always needs to be used in combination with the Niko Home Control programming software.

USB RF interface

The USB RF interface makes it possible to use Niko wireless Easywave controls (with the exception of the remote control 05-312) in the Niko Home Control installation for bus cabling. This allows wireless controls to be installed: • on surfaces unsuited to cabling (e.g. glass or concrete partitions) • for the renovation of heritage-listed buildings • for expansions of existing installations where drilling or channelling work is not permitted • in office areas with movable partition walls • when complex cabling is to be avoided. The interface is shaped like a USB stick and can be connected to the connected controller (550-0000x) in the electrical cabinet, using the provided extension cable (3 m). The end of the extension cable is fitted with an assembly ring allowing the antennae to be attached to the outside of the electrical cabinet for optimal reception.

Niko dimmer switch for Hue system

With this wireless and battery-free dimmer switch, you can effortlessly operate Philips Hue lamps. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating scene settings). No wall breaking or cable installation is needed. The dimmer switch can be mounted on a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). Please note that Philips Hue Bridge v2 is required and not included.

Favorites ( 0 )