! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Wireless hand-held transmitter with 5 channels and 3 control buttons

This hand-held transmitter controls a maximum of 15 circuits independently (depending on the settings of the receivers) and can be used for one-, two- or four-button functions. Visual feedback of the channel selection and control via LEDs.

The hand-held transmitter can also be used in the Niko Home Control installation in combination with the Niko Home Control RF interface Easywave.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals

Remote control with 5 channels and 3 control keys

Reference code
05-318

With this hand-held transmitter, you control a maximum of 15 circuits, independent of one another, but dependent on the receiver settings. You use the hand-held transmitter for 1-key, 2-key and 4-key functions. The operation status and channel selection are indicated with LEDs.

Technical specifications:

  • power supply voltage: 3V DC battery (supplied)
  • transmission range: approximately 30 metres indoors, 100 metres in open spaces
  • dimensions: 38 x 108 x 14 mm (W x H x D)
  • frequenty band: 868,0 – 868,6MHz
  • maximum power output: -4,10 dBm

Specification description

The hand-held transmitter controls a maximum of 15 circuits, independent of one another. It has a visual check (LED) of the channel selection and operation status.

Related products

Niko dimmer switch for Hue system

With this wireless and battery-free dimmer, you can operate the Philips Hue lamps effortlessly. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating mood settings). Mechanism including button and Niko Original or Intense flush surround plate.

Wireless switch with two buttons

This wireless switch with two buttons can be used by a smart switch or a wireless receiver. It can be used as one dual-button control (upper=on, lower=off), or as two one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation in combination with the Niko Home Control RF interface Easywave.

Smart single switch with push button and RF extensions, 10 A

The smart switch has a switching contact to switch lighting on and off. It has a transmitter and receiver operating according to the Easywave protocol. If desired, extra controls can be added. These could be both classic wired push buttons and wireless controls according to the Easywave protocol. By doing so, it can effortlessly replace any traditional single, multiway, or intermediate switching. This makes the smart switch especially suitable for renovation projects or listed building interiors in which drilling or channelling work should be avoided. Please note, the only condition for the use of the smart switch is the presence of the neutral conductor in the flush-mounting box where the smart switch will be placed. Besides being able to switch its own contact, the smart switch is also able to switch other receivers operating according to the Easywave protocol. This function can also be incorporated in a mood setting/preset. In doing so, you can switch all lighting included in the mood setting/preset with one push of the button. It is fitted with a feedback LED of which the behaviour can be adapted to the needs of the user.

Favorites ( 0 )