RF receiver for low-voltage devices, potential free (SELV), 2 changeover contacts, surface mounting
This surface-mounted receiver allows controlling low-voltage devices using a wireless Easywave button or a wired button. This receiver has two potential-free changeover relay contacts, only suitable for switching devices with safety extra low voltage (SELV).
It can receive signals from a Niko Easywave hand-held transmitter and/or wireless switch. For local operation, up to two external wired buttons can be connected.
Up to 32 transmission codes can be programmed into the receiver. The receiver is equipped with either 1-button operation (PULSE, DEAD MAN), 2-button operation (ON/OFF, UP/DOWN), 3-button operation (UP/STOP/DOWN) or 4-button operation (UP/STOP/DOWN/STOP).
Product details
RF receiver for low-voltage devices, potential free (SELV), 2 changeover contacts, surface mounting
This surface-mounted receiver allows controlling low-voltage devices using a wireless Easywave button or a wired button. This receiver has two potential-free changeover relay contacts, only suitable for switching devices with safety extra low voltage (SELV).
It can receive signals from a Niko Easywave hand-held transmitter and/or wireless switch. For local operation, up to two external wired buttons can be connected.
Up to 32 transmission codes can be programmed into the receiver. The receiver is equipped with either 1-button operation (PULSE, DEAD MAN), 2-button operation (ON/OFF, UP/DOWN), 3-button operation (UP/STOP/DOWN) or 4-button operation (UP/STOP/DOWN/STOP).
Specification description
RF receiver for low-voltage devices, potential free (SELV), 2 changeover contacts, surface mounting
- Radiated power: 6.38 mW
- Modulation: FSK
- Input: 2 external push buttons
- Output: 2 potential-loaded relay contacts (changeover)
- Power consumption (stand-by): 0.18 W
- Power consumption relay switched without load: 0.6 W
- Maximum contact load:
- AC: 60 V / 1 A / 60 VA
- DC: 60 V / 1 A / 30 W
- Not compatible with Niko Home Control (wireless bridge or wireless smart hub)
- Communication protocol: Easywave
- Operating frequency: 0.8683 GHz
- Ambient temperature: -20 – +60 °C
- Protection degree: IP20
- Weight: 50 g
- Wire capacity: – 1 x 2.5 mm² per connection terminal
- Dimensions (HxWxD): 70 x 64 x 35 mm
- Marking: CE
Related products
Wireless switch with 2 control buttons
This wireless switch with two control buttons can be used by a wireless receiver from the Easywave range. It can be used as one dual-button control (upper: on, lower: off), or as two one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation for bus wiring in combination with the USB RF interface for Niko Home Control (410-00099) or in the Niko Home Control installation for traditional wiring in combination with the wireless smart hub (552-00001). This device is not compatible with the wireless bridge (550-00640).
Wireless mini hand-held transmitter with 1 channel and 4 action buttons
This hand-held transmitter has four independent action buttons and can be used in combination with all Niko receivers. A different function can be assigned to every action button. Visual feedback of the control via an LED. The battery is supplied with the transmitter. In combination with the USB RF interface for Niko Home Control (410-00099), the hand-held transmitter can also be used in Niko Home Control installations.
Mini hand-held RF transmitter with 1 channel and 1 action button
This hand-held transmitter has one control button and can be used in combination with every Niko receiver. One function can be assigned to the control button. Visual check of the control via a LED. For use in a residential environment. Battery supplied. In combination with the USB RF interface for Niko Home Control(410-00099), the hand-held transmitter can also be used in Niko Home Control installations.
