! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Plug-through socket with wireless receiver and side earthing

This plug-through socket equipped with a single-pole switching contact (10 A) has three different modes: classic switching function (on/off), teleruptor and delayed off (7 min, time not adjustable). Wireless transmitters can be connected to this socket.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals
Certificaten CE-Marking

RF Plug-through socket UITG. Side earthing, 1-channel, 868MHz

Reference code
05-341

Plug-through socket-receiver with side earthing, wirelessly controlled via radio frequency (868.3MHz). Equipped with one switch contact, 10A, 230V 50Hz. Choice of 3 different modes. Maximum of 32 transmitters per receiver.

Specification description

RF Plug-through socket UITG. Side earthing, 1-channel, 868MHz

  • Equipped with one switching contact 10 A, 230 V, 50Hz
  • Choose from 3 different modes
  • Max. 32 transmitters per receiver
  • Power supply: 230 V 50 Hz
  • Max. transmission range in a building: 30 m
  • Max. transmission range in open field: 100 m
  • Modulation type: FSK
  • Not compatible with the wireless bridge
  • Maximum MCB rating: 10 A (limited by national installation rules)
  • Communication protocol: Easywave
  • Dimensions (HxWxD): 119 x 75 x 50 mm
  • Marking: CE

Related products

Niko dimmer switch for Hue system

With this wireless and battery-free dimmer switch, you can effortlessly operate Philips Hue lamps. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating scene settings). No wall breaking or cable installation is needed. The dimmer switch can be mounted on a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). Please note that Philips Hue Bridge v2 is required and not included.

Niko dimmer switch, KNX®

This wireless and battery-free dimmer switch in Niko design can operate as a switch, a dimmer, a roller shutter control or a scene selector in a KNX® system. This dimmer switch works together with the KNX® wireless media coupler (360-33001) who transmits the KNX® commands to the KNX® bus. This allows you to easily extend a KNX® system without breaking walls or installing extra cables. Configure the dimmer switch buttons with the ETS software that is available on the KNX® Association website together with the KNX® programming adapter (360-39001). The following communication objects can be linked to the buttons: single channel, dimming and shutter control. The supported functions are: on, off, toggle, up, down, darker, brighter, scene number, send value in percentage, in angle, in 2 bits, in 8 bits. Up to six button combinations can be configured. The dimmer switch can be mounted into a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive tape (included).

Niko dimmer switch, EnOcean®

With this wireless and battery-free dimmer switch in Niko design, you can remotely operate EnOcean® certified wireless receivers (e.g. presence detectors with EnOcean® interface). No wall breaking or cable installation is needed. The pairing procedure with a wireless receiver determines the function of each button. Up to four buttons can be configured. The dimmer switch can be mounted in a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included).

Favorites ( 0 )