Plug-through socket with wireless receiver and pin earthing
This plug-through socket equipped with a single-pole switching contact (10 A) has three different modes: classic switching function (on/off), teleruptor and delayed off (7 min, time not adjustable).
Product details
RF plug-through socket with pin earthing
This plug-through socket has a 10A single-pole switch contact and 3 modes:
- conventional switch function;
- teleruptor;
- delayed power cut: 7 minutes (time cannot be set).
Specification description
RF plug-through socket with pin earthing
RF plug-through socket with pin earthing, wirelessly controlled via radio frequency (868.3 MHz). Equipped with one switching contact 10A, 230V50Hz. Choose from 3 different modes. Maximum 32 transmitters per receiver. max. reception range in a building: 30 m; in open field 100 m. Dimensions: 119 x 50 x 75mm. Power supply: 230V 50Hz. Modulation type: FSK. In accordance with Belgian and European legislation: CE mark on device. This product complies with all applicable European directives and regulations. For radio equipment, Niko nv declares that it complies with Directive 2014/53/EU. May be used in all European member states. Manual is included.
- Marking: CE
Related products
Niko dimmer switch for Hue system
With this wireless and battery-free dimmer switch, you can effortlessly operate Philips Hue lamps. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating scene settings). No wall breaking or cable installation is needed. The dimmer switch can be mounted on a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). Please note that Philips Hue Bridge v2 is required and not included.
Wireless switch with two buttons
This wireless switch with two buttons can be used by a wireless receiver from the Easywave range. It can be used as one dual-button control (upper=on, lower=off), or as two one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation for bus wiring in combination with the USB RF interface Easywave (410-00099) for Niko Home Control or in the Niko Home Control installation for traditional wiring in combination with the wireless smart hub (552-00001).
Wireless switch with four buttons
This wireless switch with four buttons can be used by a smart switch or a wireless receiver. It can be used as a two dual-button controls (upper:on, lower off) or as four one-button controls (on/off or pulse). The switch can also be used in the Niko Home Control installation for bus wiring in combination with the USB RF interface Easywave (410-00099) for Niko Home Control or in the Niko Home Control installation for traditional wiring in combination with the wireless smart hub (552-00001).