One channel flush mounting wireless receiver single pole potential free
This mini receiver is provided with a single-pole, potential-free switching contact (6 A) and has a specific pulse mode for controlling a bell, dimmer, motor … Wireless transmitters can be connected to this receiver. Its limited dimensions make it perfectly suitable for flush mounting.
Product details
Single-pole, potential-free, 1-channel, flush-mounting RF receiver
This flush-mounting receiver is used to control a bell, dimmer, motors … It has a 6 A potential-free switch contact. You can choose from 3 modes for the on/off functions.
Technical characteristics:
- dimensions: L70xW49xD29mm.
Specification description
Single-pole, potential-free, 1-channel, flush-mounting RF receiver
Mini receiver for flush mounting, controlled wirelessly via radio frequency (868.3 MHz). Provided with one potential-free switching contact 10 A, 230 V 50 Hz. Choose from 3 modes for the on/off functions. Max. 32 transmitters per receiver. min. reception range in a building: 30 m; in open field 100 m. Dimensions: 49 x 70 x 29 mm. Power supply: 230 V 50 Hz. Modulation type: FSK. In accordance with Belgian and European legislation: CE marked. This product complies with all applicable European directives and regulations. For radio equipment, Niko nv declares that it complies with Directive 2014/53/EU. May be used in all European member states. Manual is included.
- Communication protocol: Easywave®
- Marking: CE
Finishing set for a 1-channel flush-mounting RF receiver with single-pole (potential-free) switching contact or flush-mounting RF receiver with roller blind function
Finishing set for a 1-channel flush-mounting RF receiver with single-pole (potential-free) switching contact or for a flush-mounting RF receiver with roller blind function. Finishing colour: cream.
Related products
Niko dimmer switch for Hue system
With this wireless and battery-free dimmer switch, you can effortlessly operate Philips Hue lamps. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating scene settings). No wall breaking or cable installation is needed. The dimmer switch can be mounted on a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). Please note that Philips Hue Bridge v2 is required and not included.
Smart single switch with push button and RF extensions, 10 A
The smart switch has a switching contact to switch lighting on and off. It has a transmitter and receiver operating according to the Easywave protocol. If desired, extra controls can be added. These could be both classic wired push buttons and wireless controls according to the Easywave protocol. By doing so, it can effortlessly replace any traditional single, multiway, or intermediate switching. This makes the smart switch especially suitable for renovation projects or listed building interiors in which drilling or channelling work should be avoided. Please note, the only condition for the use of the smart switch is the presence of the neutral conductor in the flush-mounting box where the smart switch will be placed. Besides being able to switch its own contact, the smart switch is also able to switch other receivers operating according to the Easywave protocol. This function can also be incorporated in a scene setting/preset. In doing so, you can switch all lighting included in the scene setting/preset with one push of the button. It is fitted with a feedback LED of which the behaviour can be adapted to the needs of the user.
Smart double switch with push button and RF extensions, 2 x 10 A
The smart switch has two switching contacts of 10 A each (in total max 16 A) to switch lighting on and off. It has a transmitter and receiver operating according to the Easywave protocol. If desired, extra controls can be added. These could be both classic wired push buttons and wireless controls according to the Easywave protocol. By doing so, it can effortlessly replace any traditional single, multiway, or intermediate switching. This makes the smart switch especially suitable for renovation projects or listed building interiors in which drilling or channelling work should be avoided. Please note, the only condition for the use of the smart switch is the presence of the neutral conductor in the flush-mounting box where the smart switch will be placed. Besides being able to switch its own contact, the smart switch is also able to switch other receivers operating according to the Easywave protocol. This function can also be incorporated in a scene setting/preset. In doing so, you can switch all lighting included in the scene setting/preset with one push of the button. It is fitted with a feedback LED of which the behaviour can be adapted to the needs of the user.
