! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Modular wireless two-channel receiver

The two-channel receiver for DIN rail mounting is provided with two potential-free two-way contacts (10 A/230 V) that are independently programmable, and a connector for the external antenna (05-309). Wireless transmitters can be connected to this receiver. If the receiver is used as a roll-down shutter or ventilation control, there are five specific modes for setting the roll-down shutter functions (open, stop and close) or the different ventilation speeds. The receiver can only be connected to one phase. The two-way contacts cannot be used for safety extra-low voltage (SELV) circuits. The modular dimmers 05-715 and 05-728 can be controlled. All dimmers have to be supplied at the same phase.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals

Modular, 2-channel RF receiver

Reference code
05-352

Available until October 2020

This 2-channel receiver for DIN-rail mounting is controlled wirelessly via radio frequency. It has two, 10A / 230V potential-free changeover contacts and a connection for an external antenna (05-309). You can choose from 5 modes for the on/off functions. Depending on the mode chosen, the control occurs via 1, 2 or 4 buttons. You set the operating time to between 0 and 3 seconds and the switch-off time between 0 and 120 minutes. Will you use the 2-channel receiver for the control of roller shutters or a ventilator? Then, you have the following function settings:

  • opening, closing or stopping the roller shutters;
  • setting the speed of the ventilator.

You can only connect the device to 1 phase. The contact may not be used for circuits with safety extra-low voltage (SELV). The modular dimmers 05-703, 05-704, 05-707 and 05-728 can be used in combination with this receiver. All dimmers must receive their power from the same phase.

Technical characteristics:

  • dimensions: 4U.

Related products

Niko dimmer switch for Hue system

With this wireless and battery-free dimmer, you can operate the Philips Hue lamps effortlessly. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating mood settings). Mechanism including button and Niko Original or Intense flush surround plate.

Wireless switch with two buttons

This wireless switch with two buttons can be used by a smart switch or a wireless receiver. It can be used as one dual-button control (upper=on, lower=off), or as two one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation in combination with the Niko Home Control RF interface Easywave.

Smart single switch with push button and RF extensions, 10 A

The smart switch has a switching contact to switch lighting on and off. It has a transmitter and receiver operating according to the Easywave protocol. If desired, extra controls can be added. These could be both classic wired push buttons and wireless controls according to the Easywave protocol. By doing so, it can effortlessly replace any traditional single, multiway, or intermediate switching. This makes the smart switch especially suitable for renovation projects or listed building interiors in which drilling or channelling work should be avoided. Please note, the only condition for the use of the smart switch is the presence of the neutral conductor in the flush-mounting box where the smart switch will be placed. Besides being able to switch its own contact, the smart switch is also able to switch other receivers operating according to the Easywave protocol. This function can also be incorporated in a mood setting/preset. In doing so, you can switch all lighting included in the mood setting/preset with one push of the button. It is fitted with a feedback LED of which the behaviour can be adapted to the needs of the user.

Favorites ( 0 )