! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Modular wireless dimmer, 750 VA

The wireless dimmer for DIN rail mounting is suitable for a selection of dimmable LEDS, 230 V incandescent lamps, 230 V halogen lamps and all types of low-voltage halogen lamps. Automatic selection of the dimming principle. Control by a wired push-button or wireless transmitters. Up to 30 controls. Use with or without memory function. Additional memory for saving one atmosphere. Indication LEDs for the operation and feedback on errors. In compliance with the European directives for EMC and safety EN60669-2-1.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals

Wireless dimmer for DIN-rail mounting

Reference code
05-353

This wireless dimmer for DIN-rail mounting is suitable for dimming dimmable leds, 230V incandescent lamps, 230V halogen lamps and all types of low-voltage halogen lamps. Automatic selection of the dimming principle. Control occurs using a push button or a remote control unit. A maximum of 30 controls is possible. Can be used with or without memory function. The dimmer is equipped with a supplementary memory for saving an atmosphere. LEDs indicate operation status and error diagnoses. In compliance with the European directives for EMC and safety EN60669-2-1.

Specification description

Wireless dimmer for DIN-rail mounting. RF dimmer for DIN-rail mounting is suitable for 230V incandescent lamps, 230V halogen lamps and all types of low-voltage halogen lamps. Automatic selection of the dimming principle. Control occurs using a push button or a remote control unit. Up to 30 operations. There are 5 different operating modes: 1 or 2 push button control and use with or without memory function. Supplementary memory for saving 1 atmosphere. Possibility to switch off the light with an operating time of 3 seconds or with a run time from 0” to 3’. Indication of operation or error diagnosis using LEDs.

  • Wire capacity: 2 x 1.5 mm² or 1 x 2.5 mm² per connection terminal
  • Input voltage: 230 Vac ± 10 %, 50 Hz
  • Minimum load: 60 W/60 VA
  • Maximum load 230V-halogen lamps: 750 W
  • Maximum load electronic transformer: 750 VA
  • Maximum load ferromagnetic transformer: 750 VA
  • Maximum load bulb: 750 W
  • PLC interference suppression: this dimmer is equipped with interference suppression of PLC signals (frequency dips up to 3 Hz). This integrated interference suppression attempts to remove as many interfering signals as possible from the mains in order for most lamps to function optimally, without flashing or humming.
  • Protection from overload: thermal overload protection with automatic reset function
  • Short circuit proof: electronic short-circuit protection
  • Capacity reduction: at an ambient temperature above 35°C the maximum load will gradually decrease (see technical manual)
  • Connection terminals: 3 connection terminals on top and 3 connection terminals underneath
  • DIN dimensions: DIN 2TE
  • Marking: CE

Related products

Niko dimmer switch for Hue system

With this wireless and battery-free dimmer, you can operate the Philips Hue lamps effortlessly. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating mood settings). Mechanism including button and Niko Original or Intense flush surround plate.

Wireless switch with two buttons

This wireless switch with two buttons can be used by a smart switch or a wireless receiver. It can be used as one dual-button control (upper=on, lower=off), or as two one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation in combination with the Niko Home Control RF interface Easywave.

Wireless switch with four buttons

This wireless switch with four buttons can be used by a smart switch or a wireless receiver. It can be used as a two dual-button controls (upper:on, lower off) or as four one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation in combination with the Niko Home Control RF interface Easywave.

Favorites ( 0 )