! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Modular wireless dim receiver

The dim receiver for DIN rail mounting is provided with two channels and a connector for the external antenna (05-309). Wireless transmitters can be connected to this receiver. Each channel consists of an NO contact (4 A/230 V) and a control output 1-10 V (45 mA). Electronic ballasts of dimmers (05-715, 65-410) can be directly controlled with a current signal 1-10 V in accordance with the EN60929 standard. In addition to the conventional dimming from 0 to 100%, it is also possible to activate a preset dimming level or an atmosphere.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals

Modular RF dim controller receiver

Reference code
05-350

This dim controller receiver for DIN-rail mounting is controlled wirelessly via radio frequency. It has 2 channels with a 4A/ 230V N.O. contact and a control output of 1-10V 45mA, in accordance with the EN60929 standard. It sends electronic ballasts directly with a 1-10V current signal or dimmers, e.g., 05-715 and 65-410. The device has a connection for an external antenna (05-309) and 9 modes for the functions settings. Depending on the mode chosen, the control occurs via 1, 2 or 4 buttons. With the dim function, you can dim continuously or call up a pre-set atmosphere. You set the operating time to between 0 and 3 seconds and the switch-off time between 0 and 120 minutes.

Technical characteristics:

  • dimensions: 4U.

Related products

Niko dimmer switch for Hue system

With this wireless and battery-free dimmer, you can operate the Philips Hue lamps effortlessly. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating mood settings). Mechanism including button and Niko Original or Intense faceplate.

Wireless switch with two buttons

This wireless switch with two buttons can be used by a wireless receiver from the Easywave range. It can be used as one dual-button control (upper=on, lower=off), or as two one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation for bus wiring in combination with the USB RF interface Easywave (410-00099) for Niko Home Control or in the Niko Home Control installation for traditional wiring in combination with the wireless smart hub (552-00001).

Smart single switch with push button and RF extensions, 10 A

The smart switch has a switching contact to switch lighting on and off. It has a transmitter and receiver operating according to the Easywave protocol. If desired, extra controls can be added. These could be both classic wired push buttons and wireless controls according to the Easywave protocol. By doing so, it can effortlessly replace any traditional single, multiway, or intermediate switching. This makes the smart switch especially suitable for renovation projects or listed building interiors in which drilling or channelling work should be avoided. Please note, the only condition for the use of the smart switch is the presence of the neutral conductor in the flush-mounting box where the smart switch will be placed. Besides being able to switch its own contact, the smart switch is also able to switch other receivers operating according to the Easywave protocol. This function can also be incorporated in a mood setting/preset. In doing so, you can switch all lighting included in the mood setting/preset with one push of the button. It is fitted with a feedback LED of which the behaviour can be adapted to the needs of the user.

Favorites ( 0 )