! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Modular and wireless electricity measuring module, 1 channel, 63 A

The measuring module is used to measure the electricity consumption or production up to 63 A. It can be used as a central meter in a single-phase installation. In case production is present in the installation, it is able to measure when energy will be sent back to the grid.

It is also possible to measure multiple circuits as long as they are connected to the same phase.

It can buffer 15-minute values for consumption during 25 hours and also measure the live consumption or the live production.

Attach the accompanying current clamp by clipping it around the conductor of the circuit or phase to be measured (measuring current) and use the connection terminals to establish a connection with the circuit or phase to be measured (measuring voltage). By measuring both electrical current and voltage, the measurements will be accurate.

The module is provided with onestatus LED.

The measuring module uses the Niko RF protocol (Radio Frequency 868 Mhz) to transmit its measured values wirelessly to the Niko connected switch gateway (410-0100x) and transmits its measured values.

Product details

This product consists of several components. Below you will find an overview of all the component parts.

External antenna with connector for wireless applications

Reference code
05-309

The external antenna has a connection which makes reception in a metal cabinet possible. The connection cable of the external antenna is 3 meters long.

Specification description

Antenna with 3 m connecting cable with connector. Connectable to all modular Niko RF receivers (868.3 MHz).

Modular and wireless electricity measuring module, 1 channel, 63 A

Reference code
440-01063

The measuring module is used to measure the electricity consumption or production up to 63 A. It can be used as a central meter in a single-phase installation. In case production is present in the installation, it is able to measure when energy will be sent back to the grid.

It is also possible to measure multiple circuits as long as they are connected to the same phase.

It can buffer 15-minute values for consumption during 25 hours and also measure the live consumption or the live production.

Attach the accompanying current clamp by clipping it around the conductor of the circuit or phase to be measured (measuring current) and use the connection terminals to establish a connection with the circuit or phase to be measured (measuring voltage). By measuring both electrical current and voltage, the measurements will be accurate.

The module is provided with one status LED.

The measuring module uses the Niko RF protocol (Radio Frequency 868 Mhz) to transmit its measured values wirelessly to the Niko connected switch gateway (410-0100x).

Related products

Niko dimmer switch for Hue system

With this wireless and battery-free dimmer, you can operate the Philips Hue lamps effortlessly. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating mood settings). Mechanism including button and Niko Original or Intense flush surround plate.

Wireless switch with two buttons

This wireless switch with two buttons can be used by a smart switch or a wireless receiver. It can be used as one dual-button control (upper=on, lower=off), or as two one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation in combination with the Niko Home Control RF interface Easywave.

Wireless switch with four buttons

This wireless switch with four buttons can be used by a smart switch or a wireless receiver. It can be used as a two dual-button controls (upper:on, lower off) or as four one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation in combination with the Niko Home Control RF interface Easywave.

Favorites ( 0 )