! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Wireless switch with four buttons

This wireless switch with four buttons can be used by a smart switch or a wireless receiver. It can be used as a two dual-button controls (upper:on, lower off) or as four one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation in combination with the Niko Home Control RF interface Easywave.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals

Base for wireless switch with 4 control buttons

Reference code
410-00002

With this wireless switch, you control a maximum of 4 circuits, independent of one another, but dependent on the receiver settings. You use the switch for 1-key, 2-key and 4-key functions.

Technical characteristics:

  • power supply voltage: battery, 3V DC (supplied);
  • transmission range: approximately 30 meters indoors, 100 meters in open spaces;
  • mounting: with the adhesive strips or screws provided.
  • frequenty band: 868,0 – 868,6MHz
  • maximum power output: -3,25 dBm

Specification description

Base for wireless switch with 4 control buttons. Wall-mounted transmitter with 4 connections with RF technology for wireless remote control of Niko RF receivers on the frequency 868.3MHz. Each transmitter can control an unlimited number of receivers. Each receiver can be controlled by a maximum of 32 transmitters. Minimum transmission range in a building: 30m; in open spaces: 100m. Modulation type: FSK. Supplied complete with battery and pre-programmed transmitter address. Buttons and flush surround plates are to be ordered separately. Battery type: Renata 3V/270mAh CR2430; Saft 3V/270mAh LM2430; Varta 3V/260mAh CR2430; Panasonic 3V/250mAh CR2330. Can be either stuck or screwed to the wall or flush-mounting box. In compliance with Belgian and European legislation: CE marking on the device. Complies with the EN60669-2-1 standard, the EC legislation and meets the essential requirements of the R&TTE Directive 1999/5/EC. Can be used in all European Member States. User manual is included with the registration.

  • Dimensions (HxWxD): 71 x 103 mm
  • Marking: CE

Base for the mounting of a wireless switch on a flush-mounting box, claw fixing

Reference code
410-00021

Base with claw fixing for the mounting of a wireless switch on a flush-mounting box. This base makes it possible to install a wireless switch on a flush-mounting box. You can

click it together and combine it with one or more flush-mounting mechanisms from Niko.

Base for the mounting of a wireless switch on a flush-mounting box, screw fixing

Reference code
410-00022

Base with screw fixing for the mounting of a wireless switch on a flush-mounting box. This base makes it possible to install a wireless switch on a flush-mounting box. You can

click it together and combine it with one or more flush-mounting mechanisms from Niko.

Double key for wireless switch or push button with 4 control buttons, cream.

Reference code
100-00007

A double key for a bus push button. Finishing colour: cream.

  • 100-00007
    Colour cream
    Reference code 100-00007
  • 101-00007
    Colour white
    Reference code 101-00007
  • 102-00007
    Colour light grey
    Reference code 102-00007
  • 104-00007
    Colour greige
    Reference code 104-00007
  • 121-00007
    Colour sterling
    Reference code 121-00007
  • 122-00007
    Colour anthracite
    Reference code 122-00007
  • 123-00007
    Colour bronze
    Reference code 123-00007
  • 124-00007
    Colour dark brown
    Reference code 124-00007
  • 154-00007
    Colour white coated
    Reference code 154-00007
  • 157-00007
    Colour champagne coated
    Reference code 157-00007
  • 161-00007
    Colour black coated
    Reference code 161-00007
  • 200-00007
    Colour Bakelite® piano black coated
    Reference code 200-00007
  • 220-00007
    Colour alu steel grey coated
    Reference code 220-00007
  • 221-00007
    Colour alu gold coated
    Reference code 221-00007

Double key with 'I' and '0' symbols for wireless switch or push button with 4 control buttons

Reference code
100-00008

A double key with the symbol "I" and "0" for a bus push button. Finishing colour: cream.

  • 100-00008
    Colour cream
    Reference code 100-00008
  • 101-00008
    Colour white
    Reference code 101-00008
  • 102-00008
    Colour light grey
    Reference code 102-00008
  • 104-00008
    Colour greige
    Reference code 104-00008
  • 121-00008
    Colour sterling
    Reference code 121-00008
  • 122-00008
    Colour anthracite
    Reference code 122-00008
  • 123-00008
    Colour bronze
    Reference code 123-00008
  • 124-00008
    Colour dark brown
    Reference code 124-00008
  • 200-00008
    Colour Bakelite® piano black coated
    Reference code 200-00008
  • 220-00008
    Colour alu steel grey coated
    Reference code 220-00008
  • 161-00008
    Colour black coated
    Reference code 161-00008
  • 154-00008
    Colour white coated
    Reference code 154-00008
  • 221-00008
    Colour alu gold coated
    Reference code 221-00008
  • 157-00008
    Colour champagne coated
    Reference code 157-00008

Double key with 'up' and 'down' arrows for wireless switch or push button with 4 control buttons, alu steel grey coated.

Reference code
220-00010

A double key with the symbols up and down, for a bus push button. Finishing colour: alu steel grey coated.

  • 220-00010
    Colour alu steel grey coated
    Reference code 220-00010
  • 100-00010
    Colour cream
    Reference code 100-00010
  • 124-00010
    Colour dark brown
    Reference code 124-00010
  • 161-00010
    Colour black coated
    Reference code 161-00010
  • 104-00010
    Colour greige
    Reference code 104-00010
  • 101-00010
    Colour white
    Reference code 101-00010
  • 157-00010
    Colour champagne coated
    Reference code 157-00010
  • 121-00010
    Colour sterling
    Reference code 121-00010
  • 200-00010
    Colour Bakelite® piano black coated
    Reference code 200-00010
  • 122-00010
    Colour anthracite
    Reference code 122-00010
  • 221-00010
    Colour alu gold coated
    Reference code 221-00010
  • 154-00010
    Colour white coated
    Reference code 154-00010
  • 102-00010
    Colour light grey
    Reference code 102-00010
  • 123-00010
    Colour bronze
    Reference code 123-00010

Double key with ventilator symbols 0 to 3 for wireless switch or push button with 4 control buttons

Reference code
154-00013

A double key for ventilator operation for a bus push button. Finishing colour: white coated.

  • 154-00013
    Colour white coated
    Reference code 154-00013
  • 100-00013
    Colour cream
    Reference code 100-00013
  • 121-00013
    Colour sterling
    Reference code 121-00013
  • 123-00013
    Colour bronze
    Reference code 123-00013
  • 122-00013
    Colour anthracite
    Reference code 122-00013
  • 221-00013
    Colour alu gold coated
    Reference code 221-00013
  • 124-00013
    Colour dark brown
    Reference code 124-00013
  • 101-00013
    Colour white
    Reference code 101-00013
  • 220-00013
    Colour alu steel grey coated
    Reference code 220-00013
  • 200-00013
    Colour Bakelite® piano black coated
    Reference code 200-00013
  • 161-00013
    Colour black coated
    Reference code 161-00013
  • 157-00013
    Colour champagne coated
    Reference code 157-00013
  • 104-00013
    Colour greige
    Reference code 104-00013
  • 102-00013
    Colour light grey
    Reference code 102-00013

Double key with text field for wireless switch or push button with 4 control buttons, alu gold coated.

Reference code
221-00012

A double switch with space for the addition of your own text for a bus push button. Finishing colour: alu gold coated.

  • 221-00012
    Colour alu gold coated
    Reference code 221-00012
  • 154-00012
    Colour white coated
    Reference code 154-00012
  • 104-00012
    Colour greige
    Reference code 104-00012
  • 200-00012
    Colour Bakelite® piano black coated
    Reference code 200-00012
  • 157-00012
    Colour champagne coated
    Reference code 157-00012
  • 161-00012
    Colour black coated
    Reference code 161-00012
  • 102-00012
    Colour light grey
    Reference code 102-00012
  • 123-00012
    Colour bronze
    Reference code 123-00012
  • 124-00012
    Colour dark brown
    Reference code 124-00012
  • 101-00012
    Colour white
    Reference code 101-00012
  • 100-00012
    Colour cream
    Reference code 100-00012
  • 220-00012
    Colour alu steel grey coated
    Reference code 220-00012
  • 122-00012
    Colour anthracite
    Reference code 122-00012
  • 121-00012
    Colour sterling
    Reference code 121-00012

Accessories

Set of claws for wall-mounted printed circuit board

Reference code
450-00067

This set of claws is used to attach wall-mounted circuit boards to standard flush-mounting boxes without the use of screws.

Specification description

This set of claws is used to attach wall-mounted circuit boards to standard flush-mounting boxes without the use of screws.

Related products

Wireless switch with two buttons

This wireless switch with two buttons can be used by a smart switch or a wireless receiver. It can be used as one dual-button control (upper=on, lower=off), or as two one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation in combination with the Niko Home Control RF interface Easywave.

Wireless mini hand-held transmitter with 1 channel and 1 control button

This hand-held transmitter has one control button and can be used in combination with every Niko receiver. One function can be assigned to the control button. Visual check of the control via a LED. For use in a residential environment. Battery supplied. In combination with the Niko Home Control RF interface, the hand-held transmitter can also be used in Niko Home Control installations.

Wireless mini hand-held transmitter with 1 channel and 4 control buttons

This hand-held transmitter has four independent control buttons and can be used in combination with all Niko receivers. A different function can be assigned to every control button. Visual feedback of the control via an LED. The battery is supplied with the transmitter. The hand-held transmitter can also be used in the Niko Home Control installation in combination with the Niko Home Control RF interface Easywave. In combination with the Niko Home Control RF interface, the hand-held transmitter can also be used in Niko Home Control installations.

Favorites ( 0 )