! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Wireless one-channel receiver, for flush mounting

The wireless receiver with 230 V two-way contact (one channel) is suitable for flush mounting and may only be used as a wireless control in combination with small consumers. With this receiver, small consumers can be switched in three working modes (two modes for the on-off function and pulse mode). You can operate the receiver using either push buttons or hand-held transmitters.

Product details

This product consists of several components. Below you will find an overview of all the component parts.

Wireless Easywave receiver with 230 V two-way switching contact (one-channel)

Reference code
05-361

The wireless Easywave receiver with 230 V two-way switching contact (one-channel) is suitable for flush mounting and may only be used as a wireless Easywave control in combination with small consumers. With this wireless Easywave receiver, small consumers can be switched in one of the following three working modes: two modes for the on-off function and pulse mode. You can operate the receiver using either push buttons or hand-held transmitters.

Specification description

The wireless Easywave receiver with 230 V two-way switching contact (one-channel) is suitable for flush mounting and may only be used as a wireless Easywave control in combination with small consumers. With this wireless Easywave receiver, small consumers can be switched in one of the following three working modes: two modes for the on-off function and pulse mode. You can operate the receiver using either push buttons or hand-held transmitters. The product is part of the Easywave radio frequency system, a wireless installation technique between the push buttons (control points) and the consumers to be operated. The Easywave system is a modular system with transmitters and receivers. A wall transmitter has the form of a push button with two, four or eight action buttons and can be mounted on a wall. A hand-held transmitter looks like a traditional remote control unit. One transmitter can operate an unlimited number of receivers simultaneously, while one receiver can be controlled by a maximum of 32 transmitters. The remote control or wireless control operates on the basis of signal transmission via radio waves at a frequency of 868.3 MHz. This frequency only allows products that emit signals no more than 1% per hour or 36 seconds, which reduces the risk of interrupted signals to an absolute minimum. Therefore, the wireless Easywave system is excellently suited to specific applications, such as renovations of listed interiors, extensions of existing electrical installations (where drilling or channelling is not possible), for use in offices with moveable partitions or walls or in installations where complicated wiring must be avoided.

Related products

Wireless switch with two buttons

This wireless switch with two buttons can be used by a smart switch or a wireless receiver. It can be used as one dual-button control (upper=on, lower=off), or as two one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation in combination with the Niko Home Control RF interface Easywave.

Wireless switch with four buttons

This wireless switch with four buttons can be used by a smart switch or a wireless receiver. It can be used as a two dual-button controls (upper:on, lower off) or as four one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation in combination with the Niko Home Control RF interface Easywave.

Wireless mini hand-held transmitter with 1 channel and 1 control button

This hand-held transmitter has one control button and can be used in combination with every Niko receiver. One function can be assigned to the control button. Visual check of the control via a LED. For use in a residential environment. Battery supplied. In combination with the Niko Home Control RF interface, the hand-held transmitter can also be used in Niko Home Control installations.

Favorites ( 0 )