! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

One channel flush mounting wireless receiver single pole

This mini receiver equipped with a single-pole switching contact (10 A/230 Vac) is used to switch the lighting. The receiver operates both with wall transmitters and hand-held transmitters in a one- or two-button mode. Its limited dimensions make it perfectly suitable for flush mounting.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals
Certificaten CE-Marking

Single-pole, 1-channel, flush-mounting RF receiver

Reference code
05-331

This mini-receiver is used for lighting control. It is very easy to mount due to its compact dimensions. It has a 1-pole, 10A/ 230V AC switch contact. The device works with both wall-mounted and hand-held transmitters in 1- or 2-button mode. You can choose from 3 modes for the on/off functions.

Technical characteristics:

  • dimensions: L70xH49xD29mm.

Specification description

Single-pole, 1-channel, flush-mounting RF receiver

Single-pole, 1-channel, flush-mounting RF receiver

Mini receiver for flush mounting, controlled wirelessly via radio frequency (868.3 MHz). Provided with one potential-free switching contact 10 A, 230 V 50 Hz. Choose from 3 modes for the on/off functions. Max. 32 transmitters per receiver. min. reception range in a building: 30 m; in open field 100 m. Dimensions: 49 x 70 x 29 mm. Power supply: 230 V 50 Hz. Modulation type: FSK. In accordance with Belgian and European legislation: CE marked. This product complies with all applicable European directives and regulations. For radio equipment, Niko nv declares that it complies with Directive 2014/53/EU. May be used in all European member states. Manual is included.

  • Not compatible with the wireless bridge (550-00640)
  • Communication protocol: Easywave®
  • Marking: CE
  • Communication protocol: Easywave®
  • Marking: CE

Finishing set for a 1-channel flush-mounting RF receiver with single-pole (potential-free) switching contact or flush-mounting RF receiver with roller blind function, cream

Reference code
100-77001

Finishing set for a 1-channel flush-mounting RF receiver with single-pole (potential-free) switching contact or for a flush-mounting RF receiver with roller blind function. Finishing colour: cream.

  • 100-77001
    Colour cream
    Reference code 100-77001
  • 101-77001
    Colour white
    Reference code 101-77001
  • 102-77001
    Colour light grey
    Reference code 102-77001
  • 121-77001
    Colour sterling
    Reference code 121-77001
  • 122-77001
    Colour anthracite
    Reference code 122-77001
  • 123-77001
    Colour bronze
    Reference code 123-77001
  • 124-77001
    Colour dark brown
    Reference code 124-77001
  • 154-77001
    Colour white coated
    Reference code 154-77001
  • 157-77001
    Colour champagne coated
    Reference code 157-77001
  • 161-77001
    Colour black coated
    Reference code 161-77001
  • 200-77001
    Colour piano black coated
    Reference code 200-77001
  • 220-77001
    Colour steel grey coated
    Reference code 220-77001
  • 221-77001
    Colour gold coated
    Reference code 221-77001

Related products

Niko dimmer switch, KNX®

This wireless and battery-free dimmer switch in Niko design can operate as a switch, a dimmer, a roller shutter control or a scene selector in a KNX® system. This dimmer switch works together with the KNX® wireless media coupler (360-33001) who transmits the KNX® commands to the KNX® bus. This allows you to easily extend a KNX® system without breaking walls or installing extra cables. For best performance, follow the installation and radio planning guidelines. Configure the dimmer switch buttons with the ETS software that is available on the KNX® Association website together with the KNX® programming adapter (360-39001). The following communication objects can be linked to the buttons: single channel, dimming and shutter control. The supported functions are: on, off, toggle, up, down, darker, brighter, scene number, send value in percentage, in angle, in 2 bits, in 8 bits. Up to six button combinations can be configured. The dimmer switch can be mounted into a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive tape (included). The central plate and the faceplate must be ordered separately. The dimmer switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice.

Niko dimmer switch, Bluetooth®

With this wireless and battery-free dimmer switch in Niko design, you can remotely operate Bluetooth® low energy 2,4 GHz wireless receivers that are located in the same room. Examples are Niko presence and motion detectors with a Bluetooth® interface (P48 and M48 series) or smart lighting with integrated Bluetooth® technology from Casambi® of Xicato®. For best performance, follow the installation and radio planning guidelines. Configure the dimmer switch buttons with the respective smart lighting smartphone app or software app (e.g. Niko detector tool app, Casambi app, Xicato Control Software, SylSmart Standalone app, ... ). Up to four buttons can be configured. No wall breaking or cable installation is needed. The dimmer switch can be mounted in a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive tape (included). The central plate and faceplate must be ordered separately. The dimmer switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice.

Niko dimmer switch, EnOcean®

With this wireless and battery-free dimmer switch in Niko design, you can remotely operate EnOcean® certified 868 MHz wireless receivers. Examples are Niko presence detectors with an EnOcean® interface (350-41680, 350-41780, 350-41781). No wall breaking or cable installation is needed. For best performance, follow the installation and radio planning guidelines. The pairing procedure with a wireless receiver determines the function of each button. Up to four buttons can be configured. The dimmer switch can be mounted in a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). The central plate and the faceplate must be ordered separately. The dimmer switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice.

Favorites ( 0 )