! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

One channel flush mounting wireless receiver single pole potential free

This mini receiver is provided with a single-pole, potential-free switching contact (6 A) and has a specific pulse mode for controlling a bell, dimmer, motor … Wireless transmitters can be connected to this receiver. Its limited dimensions make it perfectly suitable for flush mounting.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals
Certificaten CE-Marking

Single-pole, potential-free, 1-channel, flush-mounting RF receiver

Reference code
05-332

This flush-mounting receiver is used to control a bell, dimmer, motors … It has a 6 A potential-free switch contact. You can choose from 3 modes for the on/off functions.

Technical characteristics:

  • dimensions: L70xW49xD29mm.

Specification description

Single-pole, potential-free, 1-channel, flush-mounting RF receiver

Mini receiver for flush mounting, controlled wirelessly via radio frequency (868.3 MHz). Provided with one potential-free switching contact 10 A, 230 V 50 Hz. Choose from 3 modes for the on/off functions. Max. 32 transmitters per receiver. min. reception range in a building: 30 m; in open field 100 m. Dimensions: 49 x 70 x 29 mm. Power supply: 230 V 50 Hz. Modulation type: FSK. In accordance with Belgian and European legislation: CE marked. This product complies with all applicable European directives and regulations. For radio equipment, Niko nv declares that it complies with Directive 2014/53/EU. May be used in all European member states. Manual is included.

  • Communication protocol: Easywave®
  • Marking: CE

Finishing set for a 1-channel flush-mounting RF receiver with single-pole (potential-free) switching contact or flush-mounting RF receiver with roller blind function, cream

Reference code
100-77001

Finishing set for a 1-channel flush-mounting RF receiver with single-pole (potential-free) switching contact or for a flush-mounting RF receiver with roller blind function. Finishing colour: cream.

  • 100-77001
    Colour cream
    Reference code 100-77001
  • 101-77001
    Colour white
    Reference code 101-77001
  • 102-77001
    Colour light grey
    Reference code 102-77001
  • 104-77001
    Colour greige
    Reference code 104-77001
  • 121-77001
    Colour sterling
    Reference code 121-77001
  • 122-77001
    Colour anthracite
    Reference code 122-77001
  • 123-77001
    Colour bronze
    Reference code 123-77001
  • 124-77001
    Colour dark brown
    Reference code 124-77001
  • 154-77001
    Colour white coated
    Reference code 154-77001
  • 157-77001
    Colour champagne coated
    Reference code 157-77001
  • 161-77001
    Colour black coated
    Reference code 161-77001
  • 200-77001
    Colour piano black coated
    Reference code 200-77001
  • 220-77001
    Colour steel grey coated
    Reference code 220-77001
  • 221-77001
    Colour gold coated
    Reference code 221-77001

Related products

Wireless hand-held transmitter with 4 channels and 13 control buttons

With this hand-held transmitter, you control a maximum of 52 circuits, independent of one another, but dependent on the receiver settings. You use the hand-held transmitter for 1-key, 2-key and 4-key functions. The operation status and channel selection is indicated with LEDs. This hand-held transmitter cannot be used in Niko Home Control installations.

Wireless mini transmitter interface

The wireless transmitter interface for push buttons or switches converts the push-button or switching contacts into a wireless telegram: - When connecting up to four push buttons: the wireless telegram is being sent as long as the push button is pressed (max. 10 s). - When connecting up to two switches: the wireless telegram will be sent as soon as the contact is closed. When the contact is opened, a new telegram is sent. Any programming can be assigned when closing or opening the contact. In combination with the Niko Home Control USB RF interface (410-00099), the hand-held transmitter can also be used in Niko Home Control installations.

Wireless two-channel transmitter with Easywave protocol

The wireless two-channel transmitter is suitable for flush mounting and may only be used to control wireless receivers. By using this two-channel transmitter, you can expand the switching function of existing switches or push buttons via a receiver. The two-channel transmitter checks whether a switch/push button is live and transmits the corresponding code (A, B, C or D) to the wireless receiver, which in turn switches the consumer. This wirelesss two-channel transmitter cannot be used in Niko Home Control installations.

Favorites ( 0 )