! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Modular wireless one-channel receiver

The one-channel receiver for DIN rail mounting is provided with one potential-free two-way contact (10 A/230 V) and a connector for the external antenna (05-309). Wireless transmitters can be connected to this receiver. The receiver can only be connected to one phase. The two-way contact cannot be used for safety extra-low voltage (SELV) circuits. The modular dimmers 05-703, 05-704, 05-715 and 05-728 can be controlled. All dimmers have to be supplied at the same phase.

Product details

This product consists of several components. Below you will find an overview of all the component parts.

Modular, 1-channel RF receiver

Reference code
05-351

Available until February 2020

This 1-channel receiver for DIN-rail mounting is controlled wirelessly via radio frequency. It has a 10A / 230V potential-free changeover contact and a connection for an external antenna (05-309). You can choose from 5 modes for the on/off functions. The control occurs via 1 or 2 buttons. You set the operating time to between 0 and 3 seconds and the switch-off time between 0 and 120 minutes. You can only connect the device to 1 phase. The contact may not be used for circuits with safety extra-low voltage (SELV). The modular dimmers 05-703, 05-704, 05-707 and 05-728 can be used in combination with this receiver. All dimmers must receive their power from the same phase.

Technical characteristics:

  • dimensions: 4U.

Related products

Double wireless push button

This wireless switch with two buttons can be used by a smart switch or a wireless receiver. It can be used as one dual-button control (upper=on, lower=off), or as two one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation in combination with the Niko Home Control RF interface Easywave.

Wireless switch with four buttons

This wireless switch with four buttons can be used by a smart switch or a wireless receiver. It can be used as a two dual-button controls (upper:on, lower off) or as four one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation in combination with the Niko Home Control RF interface Easywave.

Wireless mini hand-held transmitter with 1 channel and 1 control button

This hand-held transmitter has one control button and can be used in combination with every Niko receiver. One function can be assigned to the control button. Visual check of the control via a LED. For use in a residential environment. Battery supplied. In combination with the Niko Home Control RF interface, the hand-held transmitter can also be used in Niko Home Control installations.

Favorites ( 0 )