Socket outlet with pin earthing, safety shutters and overvoltage protection
This socket outlet is used to protect sensitive electronic equipment (e.g. TV, hi-fi, pc, washing machines, dishwashers and medical equipment) against voltage peaks on the mains due to mains failure or indirect lightning strokes. It does not protect against voltage peaks entering the equipment via other ways (e.g. cable distribution, data lines and telephone lines). The socket outlet exclusively protects the connected device within the technical specifications as described below. The socket outlet carries the CEBEC quality mark in accordance with the IEC61643-1 and EN61643-11 standards (class III, type 3). The varistors that limit the voltage between the phase (L) and zero conductor (N) are thermally monitored. If the red LED lights up, the protection is no longer functioning (the protected device remains connected to the mains) and the overvoltage module needs to be replaced.
Product details
Base for socket outlet with pin earthing and safety shutters, flush-mounting depth 28.5 mm, 16 A/250 Vac, plug-in terminals
Mechanism for a socket outlet with pin earthing, claw fixing and safety shutters. This socket outlet has a flush-mounting depth of 28.5 mm. A finishing set and flush surround plate in the colour of your choice must be ordered separately.
Base for socket outlet with pin earthing and safety shutters, flush-mounting depth 28.5 mm, 16 A/250 Vac, plug-in terminals
Mechanism for a socket outlet with pin earthing, screw fixing and safety shutters. This socket outlet has a flush-mounting depth of 28.5 mm. A finishing set and flush surround plate in the colour of your choice must be ordered separately.
Base for socket outlet with pin earthing and safety shutters, flush-mounting depth 28.5 mm, 16 A/250 Vac, plug-in terminals
Mechanism for a socket outlet with pin earthing, claw fixing and safety shutters. This socket outlet has a flush-mounting depth of 28.5 mm. A finishing set and flush surround plate in the colour of your choice must be ordered separately.
Base for socket outlet with pin earthing and safety shutters, flush-mounting depth 28.5 mm, 16 A/250 Vac, plug-in terminals
Mechanism for a socket outlet with pin earthing, screw fixing and safety shutters. This socket outlet has a flush-mounting depth of 28.5 mm. A finishing set and flush surround plate in the colour of your choice must be ordered separately.
Base for socket outlet with pin earthing and safety shutters, flush-mounting depth 28.5 mm, 16 A/250 Vac, screw terminals
Mechanism for a socket outlet with pin earthing, claw fixing and safety shutters. This socket outlet has a flush-mounting depth of 28.5 mm. A finishing set and flush surround plate in the colour of your choice must be ordered separately.
Base for socket outlet with pin earthing and safety shutters, flush-mounting depth 28.5 mm, 16 A/250 Vac, screw terminals
Mechanism for a socket outlet with pin earthing, screw fixing and safety shutters. This socket outlet has a flush-mounting depth of 28.5 mm. A finishing set and flush surround plate in the colour of your choice must be ordered separately.
Base for socket outlet with pin earthing and safety shutters, flush-mounting depth 28.5 mm, 16 A/250 Vac, screw terminals
Mechanism for a socket outlet with pin earthing, claw fixing and safety shutters. This socket outlet has a flush-mounting depth of 28.5 mm. A finishing set and flush surround plate in the colour of your choice must be ordered separately.
Base for socket outlet with pin earthing and safety shutters, flush-mounting depth 28.5 mm, 16 A/250 Vac, screw terminals
Mechanism for a socket outlet with pin earthing, screw fixing and safety shutters. This socket outlet has a flush-mounting depth of 28.5 mm. A finishing set and flush surround plate in the colour of your choice must be ordered separately.
Finishing set for socket outlet with overvoltage protection, earth pin and safety shutter, flush-mounting depth 28.5 mm, incl. overvoltage module with red LED
Finishing set for a socket outlet with earth pin, safety shutter and hinged lid. This central plate must be used on a socket outlet with overvoltage protection and with a flush-mounting depth of 28.5 mm. Finishing colour: cream.
Accessories
Overvoltage module with red LED for socket outlet with overvoltage protection
This overvoltage module is equipped with a red LED and is used in combination with a socket outlet with overvoltage protection.
Specification description
Seen from the front of the socket outlet, the overvoltage module is clicked into the back of the base, with the LED in the bottom-left corner. After the overvoltage module has been clicked into the back of the base, it must still be connected using 3 wires. If the red LED is illuminated, then overvoltage protection is no longer operational (the protected appliance remains live), and the overvoltage module with red LED must be replaced. The red light is produced by an LED with very limited power consumption (0.055 W when the LED is not illuminated). It is shockproof and does not radiate any heat. The connection wires of the overvoltage module are made of flexible tinned copper, are 5cm long and are insulated with PVC. Wire diameter of the connection wires: 1 mm. The rear of the overvoltage module is equipped with a Tampoprint indicating the overvoltage specifications. Uc: 250 V, Uoc: 4 kV, Up: 1.5 kV, f: 50 Hz, modes: L-L / L-PE. Short-circuit current: Icc= 1.5 kA. CE marking and CEBEC approved.
Related products
Single flush surround plate
Connected switching socket outlet for Niko Home Control with pin earthing and safety shutters, Zigbee®
With this connected switching socket outlet with built-in consumption measurement, you choose extra comfort, safety and energy awareness. The socket outlet can be easily installed in all new construction projects and can also easily replace an existing socket outlet in renovation projects without adapting the wiring. You connect the socket outlet without additional cabling with a wireless switch and the wireless smart hub (552-00001) for Niko Home Control. That way you have full control over your socket outlets and can add useful new features such as an all-off or all-on function, automatic calendar functions, remote control, consumption messages and an overview of your energy consumption.
Touchswitch, connected customisable control screen, 230 V
Touchswitch is a completely customisable touchscreen which has an extremely user-friendly interface with clear symbols. The screen is automatically activated when your hand comes near, so you can switch or dim your lights, set moods, set ventilation modes, adjust blinds and sun blinds to the desired position, in one operation. In short, all possible types of controls are available in your Niko Home Control system. Do you have a Niko Home Control thermostat (550-13050)? Then you can easily set the temperature with the touchswitch. With the corresponding configuration app not only can you choose which controls are displayed or where they are displayed on the screen, but also the way you navigate through your control screens. You can download this app for free in the respective app store for your mobile device. The touchswitch can be easily mounted in a standard flush-mounting box and is powered on 230V AC. This 230V AC variant is equipped with a switching contact 10 A (resistive), meaning that it can easily be replaced with a conventional single-pole switch. In combination with the wireless smart hub for Niko Home Control (552-00001) and additional connected control points from the Niko Home Control range for conventional wiring, you can easily add additional automation to your conventional installation. The screen communicates via your wireless home network with the rest of your Niko Home Control system. You need an active internet connection to activate the touchswitch. This internet connection ensures that your touchswitch and Niko Home Control installation are always up-to-date and have the most recent functionalities.