! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Push button with four connection terminals, NO or NC

Product details

  • This product consists of several components. Below you will find an overview of all the component parts.

    N.O. or N.C. push button with 4 connection terminals, 10 A/250 Vac, plug-in terminals

    Reference code
    170-03005

    Mechanism for a N.O. or N.G. push button with 4 connection terminals, with claw fixing. A finishing set and faceplate in the colour of your choice must be ordered separately.

    N.O. or N.C. push button with 4 connection terminals, 10 A/250 Vac, plug-in terminals

    Reference code
    170-03015

    Mechanism for a N.O. or N.G. push button with 4 connection terminals, with screw fixing. A finishing set and faceplate in the colour of your choice must be ordered separately.

    N.O. or N.C. push button with 4 connection terminals, 10 A/250 Vac, screw terminals

    Reference code
    170-03000

    Mechanism for a N.O. or N.G. push button with 4 connection terminals, with claw fixing. A finishing set and faceplate in the colour of your choice must be ordered separately.

    N.O. or N.C. push button with 4 connection terminals, 10 A/250 Vac, screw terminals

    Reference code
    170-03001

    Mechanism for a N.O. or N.G. push button with 4 connection terminals, with screw fixing. A finishing set and faceplate in the colour of your choice must be ordered separately.

    N.O. or N.C. push button with 4 connection terminals, 10 A/250 Vac, plug-in terminals

    Reference code
    170-73005

    Mechanism for a N.O. or N.G. push button with 4 connection terminals, with claw fixing. A finishing set and faceplate in the colour of your choice must be ordered separately.

    N.O. or N.C. push button with 4 connection terminals, 10 A/250 Vac, plug-in terminals

    Reference code
    170-73015

    Mechanism for a N.O. or N.G. push button with 4 connection terminals, with screw fixing. A finishing set and faceplate in the colour of your choice must be ordered separately.

    N.O. or N.C. push button with 4 connection terminals, 10 A/250 Vac, screw terminals

    Reference code
    170-73000

    Mechanism for a N.O. or N.G. push button with 4 connection terminals, with claw fixing. A finishing set and faceplate in the colour of your choice must be ordered separately.

    N.O. or N.C. push button with 4 connection terminals, 10 A/250 Vac, screw terminals

    Reference code
    170-73001

    Mechanism for a N.O. or N.G. push button with 4 connection terminals, with screw fixing. A finishing set and faceplate in the colour of your choice must be ordered separately.

    Finishing set for single switch or push button, cream

    Reference code
    100-61105

    This key is used in the installation of a single-pole, double-pole, two-way or intermediate switch or for a push button. You can control 1 light point with this key.

    Finishing colour: cream.

    • 100-61105
      Colour cream
      Reference code 100-61105
    • 101-61105
      Colour white
      Reference code 101-61105
    • 102-61105
      Colour light grey
      Reference code 102-61105
    • 104-61105
      Colour greige
      Reference code 104-61105
    • 121-61105
      Colour sterling
      Reference code 121-61105
    • 122-61105
      Colour anthracite
      Reference code 122-61105
    • 123-61105
      Colour bronze
      Reference code 123-61105
    • 124-61105
      Colour dark brown
      Reference code 124-61105
    • 154-61105
      Colour white coated
      Reference code 154-61105
    • 157-61105
      Colour champagne coated
      Reference code 157-61105
    • 161-61105
      Colour black coated
      Reference code 161-61105
    • 200-61105
      Colour piano black coated
      Reference code 200-61105
    • 220-61105
      Colour steel grey coated
      Reference code 220-61105
    • 221-61105
      Colour gold coated
      Reference code 221-61105

    Finishing set for single switch or push button, cream

    Reference code
    100-60905

    Central plate for single push button with transparent text field. You can easily add a short label or icons to the transparent text field.

    Finishing colour: cream.

    • 100-60905
      Colour cream
      Reference code 100-60905
    • 102-60905
      Colour light grey
      Reference code 102-60905
    • 101-60905
      Colour white
      Reference code 101-60905
    • 121-60905
      Colour sterling
      Reference code 121-60905
    • 123-60905
      Colour bronze
      Reference code 123-60905
    • 122-60905
      Colour anthracite
      Reference code 122-60905
    • 104-60905
      Colour greige
      Reference code 104-60905
    • 161-60905
      Colour black coated
      Reference code 161-60905
    • 124-60905
      Colour dark brown
      Reference code 124-60905
    • 157-60905
      Colour champagne coated
      Reference code 157-60905
    • 154-60905
      Colour white coated
      Reference code 154-60905
    • 221-60905
      Colour gold coated
      Reference code 221-60905
    • 200-60905
      Colour piano black coated
      Reference code 200-60905
    • 220-60905
      Colour steel grey coated
      Reference code 220-60905

    Finishing set with lens for single switch or push button, white

    Reference code
    101-60005

    Central plate made with a single push button with a lens. You can control 1 light point with this push button. An LED can be placed behind the lens so that you can see whether the light is switched on or not Finishing colour: white.

    • 101-60005
      Colour white
      Reference code 101-60005
    • 221-60005
      Colour gold coated
      Reference code 221-60005
    • 102-60005
      Colour light grey
      Reference code 102-60005
    • 100-60005
      Colour cream
      Reference code 100-60005
    • 122-60005
      Colour anthracite
      Reference code 122-60005
    • 161-60005
      Colour black coated
      Reference code 161-60005
    • 124-60005
      Colour dark brown
      Reference code 124-60005
    • 157-60005
      Colour champagne coated
      Reference code 157-60005
    • 154-60005
      Colour white coated
      Reference code 154-60005
    • 121-60005
      Colour sterling
      Reference code 121-60005
    • 200-60005
      Colour piano black coated
      Reference code 200-60005
    • 104-60005
      Colour greige
      Reference code 104-60005
    • 123-60005
      Colour bronze
      Reference code 123-60005
    • 220-60005
      Colour steel grey coated
      Reference code 220-60005
  • Niko has already created this product for you. We have combined several articles into one finished product, which is available in different variations.
    Certificaten CE-Marking

    N.O. or N.C. push button with 4 connection terminals, base, plug-in terminals and finishing set

    Reference code
    100-03008

    Compound push button 250 V (base and finishing set). This N.O or N.C. push button is equipped with 4 connection terminals.

    Specification description

    N.O. or N.C. push button with 4 connection terminals, base, plug-in terminals and finishing set.

    • Protection degree: IP20
    • Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
    • The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
    • Certification marks: CEBEC, NF
    • Marking: CE

    N.O. or N.C. push button with 4 connection terminals, 10 A/250 Vac, plug-in terminals.

    • Function: – push button
      • block-shaped silver contacts (cadmium-free) in the form of a cross
    • Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
    • Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
    • Material base
      • ureumformaldehyde (UF) with high heat resistance
      • white RAL9010 (approximately)
    • Flush-mounting frame
      • 1 mm-thick metal
      • galvanized on all sides after cutting, even on the cut edges
      • with 4 grooves with screw hole of 7 mm
      • with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
    • Flush-mounting depth: 18 mm
    • Fixing method
      • simple mounting in a flush-mounting box with grip surfaces
      • with claws that rotate open using screws with a combination screwhead (Pz1 or slot 1 x 5 mm), for mounting in a flush-mounting box with grip surfaces
      • engagement depth of claws: 31 mm
      • claws can be pushed back into their original position
      • claws can be easily pushed out using a screwdriver
    • Centre-to-centre distance
      • Simple and quick assembly of one or more mechanisms by the indication (chalk line, laser, etc.) of the centre of the flush-mounting frame
      • vertical coupling centre-to-centre distance 60 mm by sliding several bases into each other, they lock themselves automatically
      • vertical coupling centre-to-centre distance 71 mm using pre-formed lips at the bottom, by folding the lips downwards over a length of 1 mm, the bases support each other and the centre-to-centre distance is guaranteed.
      • horizontal connection of multiple bases is quick and perfect thanks to the folded-up dovetails on the left and right sides
      • extra robustness due to the folded-up edges on the outside of the base and the continuation into the inside of the base
    • End border: 4 rectangular openings (7 x 2.5 mm) which, if the flush-mounting box protrudes from the plasterwork, can compensate for a margin of between 1 and 1.2 mm, so that the faceplate can still butt up perfectly against the wall
    • Extra terminal
      • provided with a fourth terminal allowing the connection of a lighting unit
    • Wire connection
      • contact buses fitted with plug-in terminals for clamping the wires
    • Wire capacity
      • all connection terminals at the top side of the base
      • up to 2 x 2.5 mm² wire per terminal
    • Stripping length
      • 12 mm stripping length
      • indelibly indicated at the rear side: stripping length and wiring diagram
      • indelibly indicated at the front side: terminals and switch symbol
    • Lighting element
      • provided with 2 rectangular recesses for a lighting unit
      • left recess (front view): a lighting unit with wires or an automatic lighting unit can be clicked in
      • rear side: round recesses for direct contact of the automatic lighting unit with the mechanism
    • Ambient temperature: -5 – +40 °C
    • Certification marks: CEBEC, NF
    • Marking: CE

    Finishing set for single switch or push button, cream. This central plate is surrounded with a flat edge that is equipped at all 4 corners with a rectangular opening, each containing a multi-positional snap hook. The construction of the central plate ensures that the faceplate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The flat edge around the central plate also has 4 round openings that ensure the correct positioning of the faceplate in relation to the central plate. After mounting all components (faceplate, finishing set and switch), no metal parts are visible thanks to the flat edge of the central plate.

    • Function: The key and the intermediate plate (board) form one unit.
    • Number of control buttons: 1 control button
    • Material central plate: The central plate is made of rigid PC and ASA. The base material is coloured in mass.
    • Colour: cream (coloured in mass, approximately RAL 1013)
    • Dismantling: For dismounting the central plate, the flat edge is equipped with two notches indicated by a screwdriver symbol. The central plate can easily be dismounted using a slotted screwdriver.
    • Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
    • Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
    • Fire safety
      • The plastic parts of the central plate are self-extinguishing (comply with a filament test of 650°C)
      • The plastic parts of the central plate are halogen-free.
    • Dimensions of finishing with flat edge: 56 x 56 mm (HxW)

    Dimensions of visible area of finishing: 45 x 45 mm (HxW)

    • Marking: CE

    N.O. or N.C. push button with 4 connection terminals, base, screw terminals and finishing set

    Reference code
    100-03000

    This item is also available in a version with plug-in terminals. Reference code <a href="http://niko.eu/article/100-03008">100-03008</a>

    Compound push button 250 V (base and finishing set). This N.O or N.C. push button is equipped with 4 connection terminals.

    Specification description

    N.O. or N.C. push button with 4 connection terminals, base, screw terminals and finishing set.

    • Protection degree: IP20
    • Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
    • The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
    • Certification marks: CEBEC, NF
    • Marking: CE

    N.O. or N.C. push button with 4 connection terminals, 10 A/250 Vac, screw terminals.

    • Function: – push button
      • block-shaped silver contacts (cadmium-free) in the form of a cross
    • Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
    • Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
    • Material base
      • ureumformaldehyde (UF) with high heat resistance
      • white RAL9010 (approximately)
    • Flush-mounting frame
      • 1 mm-thick metal
      • galvanized on all sides after cutting, even on the cut edges
      • with 4 grooves with screw hole of 7 mm
      • with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
    • Flush-mounting depth: 18 mm
    • Fixing method
      • simple mounting in a flush-mounting box with grip surfaces
      • with claws that rotate open using screws with a combination screwhead (Pz1 or slot 1 x 5 mm), for mounting in a flush-mounting box with grip surfaces
      • engagement depth of claws: 31 mm
      • claws can be pushed back into their original position
      • claws can be easily pushed out using a screwdriver
    • Centre-to-centre distance
      • Simple and quick assembly of one or more mechanisms by the indication (chalk line, laser, etc.) of the centre of the flush-mounting frame
      • vertical coupling centre-to-centre distance 60 mm by sliding several bases into each other, they lock themselves automatically
      • vertical coupling centre-to-centre distance 71 mm using pre-formed lips at the bottom, by folding the lips downwards over a length of 1 mm, the bases support each other and the centre-to-centre distance is guaranteed.
      • horizontal connection of multiple bases is quick and perfect thanks to the folded-up dovetails on the left and right sides
      • extra robustness due to the folded-up edges on the outside of the base and the continuation into the inside of the base
    • End border: 4 rectangular openings (7 x 2.5 mm) which, if the flush-mounting box protrudes from the plasterwork, can compensate for a margin of between 1 and 1.2 mm, so that the faceplate can still butt up perfectly against the wall
    • Extra terminal
      • provided with a fourth terminal allowing the connection of a lighting unit
    • Wire connection
      • the sockets are fitted with cage clamps with permanent screws with combination screwheads (Pz1 or slot 1 x 5 mm)
      • every screw is provided with a screwdriver slot that prevents the screwdriver from sliding off the screwhead.
    • Wire capacity
      • all connection terminals at the top side of the base
      • up to 2 x 2.5 mm² wire per terminal
    • Stripping length
      • 8 mm stripping length
      • indelibly indicated at the rear side: stripping length and wiring diagram
      • indelibly indicated at the front side: terminals and switch symbol
    • Lighting element
      • provided with 2 rectangular recesses for a lighting unit
      • left recess (front view): a lighting unit with wires or an automatic lighting unit can be clicked in
      • rear side: round recesses for direct contact of the automatic lighting unit with the mechanism
    • Ambient temperature: -5 – +40 °C
    • Certification marks: CEBEC, NF
    • Marking: CE

    Finishing set for single switch or push button, cream. This central plate is surrounded with a flat edge that is equipped at all 4 corners with a rectangular opening, each containing a multi-positional snap hook. The construction of the central plate ensures that the faceplate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The flat edge around the central plate also has 4 round openings that ensure the correct positioning of the faceplate in relation to the central plate. After mounting all components (faceplate, finishing set and switch), no metal parts are visible thanks to the flat edge of the central plate.

    • Function: The key and the intermediate plate (board) form one unit.
    • Number of control buttons: 1 control button
    • Material central plate: The central plate is made of rigid PC and ASA. The base material is coloured in mass.
    • Colour: cream (coloured in mass, approximately RAL 1013)
    • Dismantling: For dismounting the central plate, the flat edge is equipped with two notches indicated by a screwdriver symbol. The central plate can easily be dismounted using a slotted screwdriver.
    • Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
    • Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
    • Fire safety
      • The plastic parts of the central plate are self-extinguishing (comply with a filament test of 650°C)
      • The plastic parts of the central plate are halogen-free.
    • Dimensions of finishing with flat edge: 56 x 56 mm (HxW)

    Dimensions of visible area of finishing: 45 x 45 mm (HxW)

    • Marking: CE

Related products

Single faceplate

Connected switching socket outlet for Niko Home Control with pin earthing and shutters, Zigbee®

With this connected switching socket outlet with built-in consumption measurement, you choose extra comfort, safety and energy awareness. The socket outlet can be easily installed in all new construction projects and can also easily replace an existing socket outlet in renovation projects without adapting the wiring. You connect the socket outlet without additional cabling with a wireless switch and the wireless smart hub (552-00001) for Niko Home Control. That way you have full control over your socket outlets and can add useful new features such as an all-off or all-on function, automatic calendar functions, remote control, consumption messages and an overview of your energy consumption.

Digital black, connected customisable control screen, 230 V

The Digital black is a completely customisable touchscreen which has an extremely user-friendly interface with clear symbols. The screen is automatically activated when your hand comes near. When there is no Niko Home Control installation available, the built-in switching contact can be controlled via the touchscreen or an N.O. push button extension (170-00005). When the connection to a Niko Home Control installation has been made, it becomes possible to switch or dim your lights, set moods, set ventilation modes, adjust blinds and sunblinds to the desired position, in one operation. In short, all possible types of controls are available in your Niko Home Control installation. Do you have a Niko Home Control thermostat (550-1305x) or an active connection with one of our heating partners? Then you can easily set the temperature with the Digital black. With the corresponding Niko Home app not only can you choose which controls are displayed or where they are displayed on the screen, but also the way you navigate through your control screens. You can download this app for free in the respective app store for your mobile device. The Digital black can be easily mounted in any standard flush-mounting box using the familiar claw or screw fixing and is powered on 230V AC (L- + N-wire required). This 230V AC variant is equipped with a switching contact 10 A (resistive), meaning that it can easily be replaced with a conventional single-pole switch. In combination with the wireless smart hub for Niko Home Control (552-00001) and additional controls from the Niko Home Control range for traditional wiring, you can easily add automation to your conventional installation. The screen communicates via your wireless home network with the rest of your Niko Home Control system. You need an active internet connection to activate the Digital black. This internet connection ensures that your Digital black and Niko Home Control installation are always up-to-date and have the most recent functionalities.

Favorites ( 0 )