Combination of flush-mounted two-way switch 10 A/250 V AC with 2-pole flush-mounted socket outlet 16 A/250 V without earthing. Complete device incl. flush surround plate and pre-assembled finishing set, Finishing colour: cream
Combination of two-way switch and socket outlet without earthing, complete device incl. flush surround plate, cream. The combined switch and double socket outlet fits in one single flush-mounting box. The switch is equipped with block-shaped, silver contacts (with an alloy of cadmium-oxide and 90% silver) in the form of a cross. The socket outlet is equipped with sockets with a large contact surface area which do not rest on the base in order to clasp and screw terminals with releases. The sockets are equipped with screw terminals for clamping the wires. All connection terminals are located at the top of the end socket and can contain up to 4 x 2.5 mm² of wire. When fixing in a flush-mounting box screws should be used. The flush-mounting frame is made of 1 mm-thick metal and is galvanized on all sides. On the horizontal and vertical axes, the flush-mounting frame has grooves for mounting into floor boxes with screws. The central plate is made of impact-resistant, dustproof and rigid polycarbonate. The base material is coloured in mass.
- Colour: cream (coloured in mass, approximately RAL 1013)
- Type of earthing: without earthing
- Power: switch 10 A/250 Vac and socket outlet 16 A/250 Vac
- All plastic components are self-extinguishing (comply with a filament test of 650°C) and are halogen-free.
- Protection degree: IP21 (designed for use in an environment with non-condensing humidity)
- Flush-mounting depth: 31 mm
- Certification marks: KEMA
- Marking: CE