Socket outlet with voltage indication, earth pin and safety shutter. This socket outlet has a flush-mounting depth of 28.5 mm and is equipped with a screw terminals and claw fixing. Includes finishing set. A flush surround plate in the colour of your choice must be ordered separately. Finishing colour: yellow.
Socket outlet with voltage indication, earth pin and safety shutter, flush-mounting depth 28.5 mm, base and finishing set, screw terminals,. The sockets are fitted with cage clamps with permanent screws. These screws have combination screwheads (Pz2 or slot 1 x 6 mm). Moreover, every screw is provided with a screwdriver slot that prevents the screwdriver from sliding off the screwhead. The stripping length (14 mm) of the wires is indelibly imprinted on the back of the base. The central plate has a vertical, rectangular, transparent lens (1 x 5 mm) on the bottom left which makes the green LED of the voltage indication module visible. Seen from the front of the socket outlet, the voltage indication module is clicked into the back of the base, with the LED in the bottom left corner. The voltage indication module is clicked onto the back of the base and in doing so is immediately connected. The voltage indication module with green LED has a polyamide housing. The green light is produced by an LED with very limited power consumption (0.25 W). It is shockproof and does not radiate any heat. The LED has a life span of min. 50,000 burning hours. CE marked. When mounting in a flush-mounting box with grip surfaces, use claws that can be rotated open using screws with a slotted screwhead (slot 0.8 x 5 mm). The claws, which have a depth of engagement of 31 mm, turn back completely when loosened. The 4 rectangular openings (7 x 2.5 mm) in the flush-mounting frame can compensate for a margin of 1 to 1.2 mm if the flush-mounting box protrudes beyond the plasterwork. In the case of such a margin, the flush surround plate can still butt up perfectly against the wall.
- Colour: The cover of the socket outlet is coloured in mass, yellow (roughly RAL 1023) and ensures that after the removal of the central plate, the socket outlet function remains clearly indicated. This is applicable in places where there are many circuits with specifically defined functions, for example, emergency power supplies in hospitals. The central plate is made of rigid PC
- The plastic components of the central plate are self-extinguishing and halogen-free and comply with a filament test of 650°C.
- After mounting, an impact-resistance of IK06 is guaranteed.