With this horizontal combination, the two splashproof, surface-mounting wall sockets are equipped with an earth pin, safety shutter and screw terminals. Both wall sockets are also equipped with a hinged protective cover and are pre-wired and mounted in a double, splashproof, surface-mounting box with two inlets on the upper side. The entire unit is splashproof which makes it extremely well-suited for use in damp areas and in demanding environments. Colour combination: black.
The Niko Hydro products are not suitable for use in ammonia rich environments (e.g. pig houses).
Splashproof, horizontal double wall socket with earth pin, safety shutter and screw terminals; includes box with two inlets on the upper side black. Each socket outlet is covered entirely by a hinged protection cap which opens upward. A spring and a hook-fastener keep the protection cap tightly closed. The socket outlet is provided with contact buses with a large contact surface that do not rest on the base in order to clasp. The sockets are fitted with cage clamps with permanent screws. These screws have combination screwheads (Pz2 or slot 1 x 5.5 mm). Moreover, every screw is provided with a screwdriver slot that prevents the screwdriver from sliding off the screwhead. All connection terminals are located at the top of the end socket and can contain up to 4 x 2.5 mm² of wire. The earthing terminal even up to 2 x 2.5 mm² + 2 x 4 mm². The stripping length (14 mm) of the wires is indelibly imprinted on the back of the base. Two laterally positioned holders inside the outlet hold the mechanism in place. A snap connector holds the wired mechanism in place. There is 15.7 mm of wiring space remaining under the mechanism. The cover has an integral closure and is hermetically sealed onto the appropriate box. The box is made of impact-resistant, dust-preventing, halogen-free and self-extinguishing polypropylene (UL94-V2/1.6 mm). The protection cap is made of rigid ABS. The socket outlet has a solid brass nickel-plated earth pin (pin earthing).
The socket outlets are mounted in a double, horizontal, splashproof, surface-mounting box with two M20 inputs on the top and bottom for the flush-mounting of two devices. The socket is supplied with two M20 cable glands and 1 M20 blind plug. Each socket outlet has an integral closure and is hermetically sealed onto the double box. The fixation points of this double, horizontal box are situated 50 mm apart on a vertical axis and 71 mm apart on a horizontal axis. This size indication is indelibly imprinted on the bottom of each box. The oval screw openings allow for imprecise drilling. By forming a pressure lock, a gasket ensures the protection degree and the double insulation. The box contains two diagonal, knock-out condensation openings. The surface-mounting box is made of impact-resistant, dust-resistant, halogen-free and self-extinguishing polypropylene (UL94-V2/1.6 mm).
- Number of mechanisms: 2
- Protection degree: The combination of a switch and a flush-mounting box has a protection degree of IP55.
- Impact resistance: After mounting, an impact-resistance of IK07 is guaranteed.
- Colour: The base material is coloured in mass, black (RAL 9005).
- Certification marks: CEBEC, NF