! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

2 RJ45 connections STP cat. 6A, flat model, base 60x71 screw and finishing set cream

Reference code
Technical manuals


Compound socket outlet (base and finishing set) with 2 RJ45 connection points Cat. 6A STP to create a network connection with 2 appliance for telephone, Ethernet, IP or internet applications. The mechanism is connected in star configuration to the central connection cabinet using a cable of the same performance type. The shielding ensures a more malfunction-resistant connection. The flush-mounting frame has internal dimensions of 45x45 mm and external dimensions of 60x71 mm and is equipped with screw fixing. Finishing colour: cream

Specification description

2 RJ45 connections STP cat. 6A, flat model, base 60x71 screw and finishing set cream.

  • Marking: CE

Combination coax with RJ45 connection UTP Cat6, flat model, 60 x 71 mm incl. screw fixing. Connection < 1 dB, suitable for Ø 9.5 mm plugs. Telenet Interkabel and VOO approved and optimised for the Telenet prescribed PVC6 and PE6 cables. The contacts are covered by means of a permanent metal cover. The coaxial cable is connected at the back of the mechanism. The stripping length is indicated on the back of the base as an aid to installation. The coaxial cable is screwed with a screw with combination screwhead (crosshead-slit 1 mm). The strain relief is screwed with a permanent screw with combination screwhead (crosshead-slit 1 mm). The unshielded RJ45 connector is used to connect devices for speech, data and image applications. The performance is cat. 6 for band widths up to 250 MHz. The adapter is equipped at the top and the bottom with snap hooks for holding the central plate in place. On each of their 4 corners, the adapters are also equipped with studs to ensure that the central plate is perfectly positioned in relation to the adapters. Telenet Interkabel and VOO is indelibly indicated on the TV adapter.

  • Marking: CE

Universal base 45 x 45 mm. When fixing in a flush-mounting box screws should be used. The flush-mounting frame is made from 1 mm-thick metal which is galvanized on all sides after cutting, even on the cut edges. On the horizontal and vertical axes, the flush-mounting frame has 4 grooves for screw mounting in flush-mounting boxes. These grooves have a screw aperture of 7 mm. For mounting on panels, the flush-mounting frame is equipped with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm. The middle of the flush-mounting frame is indicated (chalk line, laser, ..) in both the horizontal and vertical directions, so that mounting one or more mechanisms can be carried out quickly and easily. At the right and left sides, the flush-mounting frame is equipped with folded-up dovetails, allowing for a quick and perfect horizontal coupling of several switches. The folded-up edges on the outside of the base and their continuation to the inside ensure additional robustness. The bases can be coupled vertically with a centre-to-centre distance of 60 x 71 mm by sliding them into each other. They automatically lock into place. For horizontal coupling of bases with a centre-to-centre distance of 71 mm, the base is equipped with two pre-formed lips at the bottom. By folding these lips down over a length of 1 mm, this rests perfectly on the one below and the centre-to-centre distance of 71 mm is guaranteed. The flush-mounting frame is equipped, both on the top and the bottom, with a dark grey, plastic end border. This border is made of PC+ASA and is joined to the flush-mounting frame using a melting process. The corners of the two end borders are equipped with rectangular openings (7.9 x 1.5 mm) each containing a multi-positional snap hook. Thanks to the snap hooks, the 4 rectangular openings ensure that the flush surround plate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The end borders also have 4 round openings that ensure the correct positioning of the flush surround plate in relation to the central plate.

  • Dimensions (HxWxD): 45 x 45 mm

Central plate data 2x RJ, cream. The central plate is clicked onto two single adapters 1, 2, 5 or 6 or onto a double adapter 3.2 or 4.2. (Adaptors can be clicked onto a 45 x 45 mm flush-mounting frame, a trunking system with a 45 mm cover height or onto an empty Mini-Patch distribution board with a 45 x 45 mm opening.) Label dimensions: 9.5 x 42.4 mm. The central place is equipped with dust covers. At the top, the central plate is equipped with a hinged, non-transparent window with label. Dimensions label: 9.5 x 42.4 mm. To dismount simply pull the central plate off the mechanism.

  • Protection degree: The combination of a switch, a central plate and a flush surround plate has a protection degree of IP41.
  • Material central plate: The central plate is made of rigid PC and ASA. The base material is coloured in mass.
  • Colour: cream (coloured in mass, approximately RAL 1013)
  • Impact resistance: After mounting, an impact-resistance of IK06 is guaranteed.
  • The plastic parts of the central plate are self-extinguishing (comply with a filament test of 650°C) and are halogen-free.
  • Dimensions of finishing: 45 x 45 mm (HxW)
Alternative colors
  • 100-65278
    Colour cream
    Reference code 100-65278
  • 101-65278
    Colour white
    Reference code 101-65278
The article above is part of this product:

Related products:

Favorites ( 0 )