Simple male coax connection

Product details

Niko has already created this product for you. We have combined several articles into one finished product, which is available in different variations.
  • Single, male coax connection for TV, base and finishing set cream

    Add to 'My favorites' Remove from 'My favorites'


    Compound coax socket (base and finishing set). The base is equipped with screw terminals and claw fixing. The base has 1 single, male coax contact input. Finishing colour: cream A television icon is imprinted on the central plate. Finishing colour: cream

    Specification description

    Single, male coax connection for TV, base and finishing set cream.

    • Marking: CE

    Base for single coax connection for TV. Connection < 1 dB, suitable for Ø 9.5 mm plugs. The contacts are covered by means of a permanent metal cover. The coax cable is connected at the back of the mechanism. The stripping length is indicated on the back of the base as an aid to installation. The arrow pointing downward indicates where the coax cable has to be inserted. The coax cable is tightened with a screw with a combination screwhead (cross-slot 1 mm). The strain relief is screwed with a permanent screw with mixed screwhead (crosshead-slit 1 mm). When mounting in a flush-mounting box with grip surfaces, use claws that can be rotated open using screws with a slotted screwhead (slot 0.8 x 5 mm). The claws, which have a depth of engagement of 31 mm, turn back completely when loosened. The flush-mounting frame is made from 1 mm-thick metal which is galvanized on all sides after cutting, even on the cut edges. On the horizontal and vertical axes, the flush-mounting frame has 4 grooves for screw mounting in flush-mounting boxes. These grooves have a screw aperture of 7 mm. For mounting on panels, the flush-mounting frame is equipped with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm. The middle of the flush-mounting frame is indicated (chalk line, laser, ..) in both the horizontal and vertical directions, so that mounting one or more mechanisms can be carried out quickly and easily. At the right and left sides, the flush-mounting frame is equipped with folded-up dovetails, allowing for a quick and perfect horizontal coupling of several switches. The folded-up edges on the outside of the base and their continuation to the inside ensure additional robustness. The bases can be coupled vertically with a centre-to-centre distance of 60 x 71 mm by sliding them into each other. They automatically lock into place. For horizontal coupling of bases with a centre-to-centre distance of 71 mm, the base is equipped with two pre-formed lips at the bottom. By folding these lips down over a length of 1 mm, this rests perfectly on the one below and the centre-to-centre distance of 71 mm is guaranteed. The flush-mounting frame is equipped, both on the top and the bottom, with a dark grey, plastic end border. This border is made of PC+ASA and is joined to the flush-mounting frame using a melting process. The corners of the two end borders are equipped with rectangular openings (7.9 x 1.5 mm) each containing a multi-positional snap hook. Thanks to the snap hooks, the 4 rectangular openings ensure that the flush surround plate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The end borders also have 4 round openings that ensure the correct positioning of the flush surround plate in relation to the central plate.

    • Protection degree: The combination of a switch, a central plate and a flush surround plate has a protection degree of IP41.
    • Flush-mounting depth: 29.5 mm
    • Marking: CE

    Finishing set for single coax connection for TV. The central plate is clicked onto a TV/FM outlet with a single coax connection. The central plate is engraved with 'TV’.

    To dismount simply pull the central plate off the mechanism.

    • Protection degree: The combination of a switch, a central plate and a flush surround plate has a protection degree of IP41.
    • Material central plate: The central plate is made of rigid PC and ASA. The base material is coloured in mass.
    • Colour: cream (coloured in mass, approximately RAL 1013)
    • Impact resistance: After mounting, an impact-resistance of IK06 is guaranteed.
    • The plastic parts of the central plate are self-extinguishing (comply with a filament test of 650°C) and are halogen-free.
    • Dimensions of finishing: 45 x 45 mm (HxW)
    • Marking: CE
This product consists of several components. Below you will find an overview of all the component parts.


list 0