2 x RJ45 UTP Cat6A, oblique set

This mechanism with 2 RJ45 connection points, Cat 6A UTP, oblique model, is used to make a network connection with 2 devices for telephone, Ethernet, IP or Internet applications. Each of the connection points on the mechanism is connected in star configuration to the central connection cabinet using a cable of the same performance type. The flush-mounting frame has interior dimensions 45x45mm and exterior dimensions At the right and left sides, the flush-mounting frame is equipped with folded-up dovetails, allowing for a quick and perfect horizontal coupling of several switches. The folded-up edges on the outside of the base and their continuation to the inside ensure additional robustness. The bases can be coupled vertically with a centre-to-centre distance of 60 x 71 mm by sliding them into each other. They automatically lock into place. For horizontal coupling of bases with a centre-to-centre distance of 71 mm, the base is equipped with two pre-formed lips at the bottom. By folding these lips down over a length of 1 mm, this rests perfectly on the one below and the centre-to-centre distance of 71 mm is guaranteed. and is fitted with screw fixing. A finishing set and flush surround plate in the colour of your choice must be ordered separately.

This mechanism with 2 RJ45 connection points, Cat 6A UTP, oblique model, is used to make a network connection with 2 devices for telephone, Ethernet, IP or Internet applications. Each of the connection points on the mechanism is connected in star configuration to the central connection cabinet using a cable of the same performance type. The flush-mounting frame has interior dimensions 45x45mm and exterior dimensions The base is equipped on all sides with folded-up dovetails, allowing for both vertical and horizontal coupling (centre-to-centre distance of 71 x 71 mm) of several bases to be carried out quickly and perfectly. The folded-up edges on the outside of the base and their continuation to the inside ensure additional robustness. and is fitted with screw fixing. A finishing set and flush surround plate in the colour of your choice must be ordered separately.

Central plate for 2 RJ outlets, oblique model. The central plate has a transparent text field to which you can easily add your text and icons. Finishing colour: cream.