DIN-rail module with unshielded RJ45 connector Cat 5E for central mounting of an RJ connection point in the connection cabinet
Description
This DIN-rail module with unshielded RJ45 connector Cat 5E is used for central mounting of an RJ connection point in the connection cabinet. This connection point is used to make a network connection with 1 device for telephone, Ethernet, IP or Internet applications. The DIN connector is connected in a star configuration to the mechanism using a cable of the same performance type. This provides a central overview of all connection points throughout the entire residence.
Specification description
DIN-rail module with unshielded RJ45 connector Cat 5E for central mounting of an RJ connection point in the connection cabinet
- Protection degree: The combination of a mechanism, a central plate and a faceplate has a protection degree of IP41
- Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
Related products:
1 RJ45-connection UTP cat. 5E, flat model, incl. base 60 x 71 mm with claw fixing
Niko socket outlet with 1 RJ45 connection point, Cat 5E UTP. This is used to make a network connection with 1 device for telephone, Ethernet, IP or Internet applications. The socket outlet is connected in a star configuration to the central connection cabinet using a cable of the same performance type. The flush-mounting frame has interior dimensions 45x45mm and exterior dimensions At the right and left sides, the flush-mounting frame is equipped with folded-up dovetails, allowing for a quick and perfect horizontal coupling of several switches. The folded-up edges on the outside of the base and their continuation to the inside ensure additional robustness. The bases can be coupled vertically with a centre-to-centre distance of 60 x 71 mm by sliding them into each other. They automatically lock into place. For horizontal coupling of bases with a centre-to-centre distance of 71 mm, the base is equipped with two pre-formed lips at the bottom. By folding these lips down over a length of 1 mm, this rests perfectly on the one below and the centre-to-centre distance of 71 mm is guaranteed.x71mm and is fitted with claw fixing. A finishing set and faceplate in the colour of your choice must be ordered separately.
1 RJ45-connection UTP cat. 5E, flat model, incl. base 60 x 71 mm with screw fixing
Niko socket outlet with 1 RJ45 connection point, Cat 5E UTP. This is used to make a network connection with 1 device for telephone, Ethernet, IP or Internet applications. The socket outlet is connected in a star configuration to the central connection cabinet using a cable of the same performance type. The flush-mounting frame has interior dimensions 45x45mm and exterior dimensions At the right and left sides, the flush-mounting frame is equipped with folded-up dovetails, allowing for a quick and perfect horizontal coupling of several switches. The folded-up edges on the outside of the base and their continuation to the inside ensure additional robustness. The bases can be coupled vertically with a centre-to-centre distance of 60 x 71 mm by sliding them into each other. They automatically lock into place. For horizontal coupling of bases with a centre-to-centre distance of 71 mm, the base is equipped with two pre-formed lips at the bottom. By folding these lips down over a length of 1 mm, this rests perfectly on the one below and the centre-to-centre distance of 71 mm is guaranteed.x71mm and is fitted with screw fixing. A finishing set and faceplate in the colour of your choice must be ordered separately.
1 RJ45-connection UTP cat. 5E, flat model, incl. base 71 x 71 mm with screw fixing
Niko socket outlet with 1 RJ45 connection point, Cat 5E UTP. This is used to make a network connection with 1 device for telephone, Ethernet, IP or Internet applications. The socket outlet is connected in a star configuration to the central connection cabinet using a cable of the same performance type. The flush-mounting frame has interior dimensions 45x45mm and exterior dimensions The base is equipped on all sides with folded-up dovetails, allowing for both vertical and horizontal coupling (centre-to-centre distance of 71 x 71 mm) of several bases to be carried out quickly and perfectly. The folded-up edges on the outside of the base and their continuation to the inside ensure additional robustness.x71mm and is fitted with screw fixing. A finishing set and faceplate in the colour of your choice must be ordered separately.
Central plate data 1x RJ, cream
Central plate for 1 RJ connection UTP Cat 5E in a flat model. Finishing colour: cream.
1 RJ45 connection UTP cat. 5E, base and finishing set
Compound socket outlet (base and finishing set) with 1 RJ45 connection point Cat. 5E UTP to create a network connection with 1 appliance for telephone, Ethernet, IP or internet applications. The socket outlet is connected in a star configuration to the central connection cabinet using a cable of the same performance type.
1 RJ45 connection UTP cat. 5E, flat model, base and finishing set
Compound socket outlet (base and finishing set) with 1 RJ45 connection point Cat5E UTP to create a network connection with 1 appliance for telephone, Ethernet, IP or internet applications. The socket outlet is connected in a star configuration to the central connection cabinet using a cable of the same performance type.
1 RJ45 connection UTP cat. 5E, flat model, base and finishing set
Compound socket outlet (base and finishing set) with 1 RJ45 connection point Cat. 5E UTP to create a network connection with 1 appliance for telephone, Ethernet, IP or internet applications. The socket outlet is connected in a star configuration to the central connection cabinet using a cable of the same performance type.
